Surface Treatment: Polishing
Forging Tolerance: +/-0.1mm
Standard: ASTM
Certification: ISO 9001:2008, API/Q1
Flange Surface: Yellow Paint, Oiled,Galvanized
OEM: Available
Trademark: hongfeng
Specification: ASTM, ANSI. API, DIN, JIS
Origin: Jiangsu Jiangyin
HS Code: 73072100
Surface Treatment: Polishing
Forging Tolerance: +/-0.1mm
Standard: ASTM
Certification: ISO 9001:2008, API/Q1
Flange Surface: Yellow Paint, Oiled,Galvanized
OEM: Available
Trademark: hongfeng
Specification: ASTM, ANSI. API, DIN, JIS
Origin: Jiangsu Jiangyin
HS Code: 73072100
 Â
Product Description
1. Application:
For seal or connect of pipe/tub-e lines
2. Material:
304,304L,316,316L,carbon steel or other material on request
3. Standard:
ANSI,DIN,JIS,BS,EN1092-1
4. Size:
DN15 (1/2") to DN5000 (200")
5. Type:
 Slip-On, Welding Neck, Blind, Socket Welding, Threaded, Lap Joint and Plate etc.
| Types' Specification |
| Slip-on |
1. Not normally used in high-stress applications due to low hub and weld attachment
2. Silps over outside of pipe
3. Inside of flange welded at hub and end of pipe
|
| Welding neck |
1. Preferred for high-pressure, subzero or elevated temperature
2. Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3.Easily radiographed and provides excellent stress distribution
|
| Blind |
1. Used to close ends of piping
2. Has no bore
3. Permits access to sealed lines
|
| Socket welding |
1.For small-diameter chemical processes, hydraulic and stream distribution lines
2. Similar to slip-on flange
3. Counter bore matches pipe bore, allowing unrestricted flow
4. Counter bore from hub side fits pipe's outer diameter -  can insert pipe in socket with fillet weld at hub
|
| Threaded |
1. Used where welding would would be hazardous
2. Designed for low-pressure and non-cyclic applications
3. Bore is threaded to match pipe thread
4. Tapered to seal pipe and flanges
|
|
Lap joint
Â
|
1.Used where bolt alignment or access for cleaning is required
2.Similar to slip-on flange when used with lap joint stub end
3. Radius at intersection of flange face and bore to match lap joint stub end
|
| Different accessories are available |
  Free forging/Die forging/Rolling Â
7. Rustproof treatment:  Lightly oiled, Galvanized,  Painting with different colors,   Just keep the flanges dry and clean as per customers' requirement 8. Inspection:  Factory in-house, Third party inspection available upon request 
 Â
Product Description
1. Application:
For seal or connect of pipe/tub-e lines
2. Material:
304,304L,316,316L,carbon steel or other material on request
3. Standard:
ANSI,DIN,JIS,BS,EN1092-1
4. Size:
DN15 (1/2") to DN5000 (200")
5. Type:
 Slip-On, Welding Neck, Blind, Socket Welding, Threaded, Lap Joint and Plate etc.
| Types' Specification |
| Slip-on |
1. Not normally used in high-stress applications due to low hub and weld attachment
2. Silps over outside of pipe
3. Inside of flange welded at hub and end of pipe
|
| Welding neck |
1. Preferred for high-pressure, subzero or elevated temperature
2. Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3.Easily radiographed and provides excellent stress distribution
|
| Blind |
1. Used to close ends of piping
2. Has no bore
3. Permits access to sealed lines
|
| Socket welding |
1.For small-diameter chemical processes, hydraulic and stream distribution lines
2. Similar to slip-on flange
3. Counter bore matches pipe bore, allowing unrestricted flow
4. Counter bore from hub side fits pipe's outer diameter -  can insert pipe in socket with fillet weld at hub
|
| Threaded |
1. Used where welding would would be hazardous
2. Designed for low-pressure and non-cyclic applications
3. Bore is threaded to match pipe thread
4. Tapered to seal pipe and flanges
|
|
Lap joint
Â
|
1.Used where bolt alignment or access for cleaning is required
2.Similar to slip-on flange when used with lap joint stub end
3. Radius at intersection of flange face and bore to match lap joint stub end
|
| Different accessories are available |
  Free forging/Die forging/Rolling Â
7. Rustproof treatment:  Lightly oiled, Galvanized,  Painting with different colors,   Just keep the flanges dry and clean as per customers' requirement 8. Inspection:  Factory in-house, Third party inspection available upon requestÂ
Insulating Glass Unloading Machine
Automatic Insulating Glass Unloading Machine used to unload glass or insulating glass.We have two models,one is Automatic Glass Unloading Machine,the other one is Glass Vacuum Lifter.
Automatic Glass Unloading machine is composed of PLC control system, machine-head section, transportation section, sucker-structure section, servo drive section, etc. This machine can save 2-3 people's labor and improve work efficiency.
Glass Vacuum Lifting Machine is widely used in transition of various kind of insulating glass, laminated glass, float glass, tempered glass and etc. It features better stability, much safer and more convenient to operate.
Glass Loading Machine,Insulating Glass Unloading Machine,2.5M Igu Glass Unloading Machine,Vacuum Glass Unloading Machine,Igu Automatic Glass Unloading Machine,Glass Unloading Machine
JINAN WEILI MACHINE CO LTD , https://www.wgmglassmachine.com