Ball Valve Solenoid Valve (SLA1SH02T1AC3)

November 10, 2022

  • Model NO.: SLA1SH02T1AC3
  • Connection Form: Thread
  • Nominal Pressure: 0.5~25bar
  • Structure: Steam
  • Function: Steam
  • Application: Industrial Usage, Water Industrial Usage, Household Usage
  • Valve: 2.5mm
  • Steam Solenoid Valve: Teflon
  • Specification: CE & TUV & ISO
  • HS Code: 8481804090
  • Material: Brass
  • Driving Mode: Electric
  • Channel: 2/2 Way
  • Type: Steam
  • Temperature: High Temperature
  • Solenoid Valve: 1/8′′
  • Steam Valve: 0~8bar
  • Trademark: Sanlixin
  • Origin: Yuyao Zhejiang China

Ball Valve-Brass Series 2/2-Way Piston (SLA)

1: 2-way normally closed solenoid valve, Closed when de-energizes, open when energized.
2: Serialized products, small in size. Large flow rate, widely use
3: Body material: Brass
4: Ambient Temp 0-65
5: Flow as the arrow, mounts in any position: Best position is solenoid vertical and upright direction.
6: Voltage: 220VAC/230VAC/240VAC/110VAC/24VAC 50/60Hz 24VDC/12VDC Voltage tolerance: +10% to -10% applicable voltage
7: Coil can fix Germeny Nass Coil
8: This series valves are offered NBR VITON EPDM etc For series and diaphragm to provide on-off control of various fluids.

New  Pipe Orifice Pressure Seals Coil Body
Model code Size (mm) (bar) Class Material
SLA1SH02T1AC3 1/8 2.5 0~8 TEFLON H Forged brass
SLA1SH02T1AC6 1/8 4.5 0~7 TEFLON H Forged brass
SLA1SH02T1BC3 1/4'' 2.5 0~8 TEFLON H Forged brass
SLA1SH02T1BC6 1/4'' 4.5 0~7 TEFLON H Forged brass
SLA1WH02T1C15 3/8'' 15 0.5~10 TEFLON H Forged brass
SLA1WH02T1D15 1/2'' 15 0.5~10 TEFLON H Forged brass
SLA1WH02T1E20 3/4'' 20 0.5~10 TEFLON H Forged brass
SLA1WH02T1G25 1'' 25 0.5~10 TEFLON H Forged brass
SLA1WH02T1H35 11/4'' 35 0.5~10 TEFLON H Forged brass
SLA1WH02T1J35 11/2'' 35 0.5~10 TEFLON H Forged brass
SLA1WH02T1K50 2'' 50 0.5~10 TEFLON H Forged brass
SLA1DF02V1C15 3/8'' 15 0.5~25 VITON F Forged brass
SLA1DF02V1D15 1/2'' 15 0.5~25 VITON F Forged brass
SLA1DF02V1E20 3/4'' 20 0.5~25 VITON F Forged brass
SLA1DF02V1G25 1'' 25 0.5~25 VITON F Forged brass
SLA1DF02V1H35 11/4'' 35 0.5~25 VITON F Forged brass
SLA1DF02V1J35 11/2'' 35 0.5~25 VITON F Forged brass
SLA1DF02V1K50 2'' 50 0.5~25 VITON F Forged brass

Double Girder Gantry Crane With Winch

Both the end of horizontal and vertical rail are equipped with Limit Switch and baffle to avoid the dropping of the main engine.

The internal friction clutch of the hanging machine can lead to the motor idling when over weight hanging and prevent the machine body and load chain from damage.

The upper and lower limit switches will be immediately prompted to stall the motor when over weight lift. Also, there is overheating protection device to protect the motor from overheating and burning.

The emergency stop button will make the whole system power failure and will be restarted manually.

Double Girder Gantry Crane With Winch,Load Gantry Crane,Trolley Hook Gantry Crane

Eurocrane (China) Co., Ltd. , https://www.overhead-crane.com