Brass Fittings-Press Fittings- Reduced Straight

Model NO.: 16mm, 18mm, 20mm, 25mm, 26mm, 32mm
Trademark: Mingshi/OEM
Transport Package: CTN
Origin: Zhejiang, China
Model NO.: 16mm, 18mm, 20mm, 25mm, 26mm, 32mm
Trademark: Mingshi/OEM
Transport Package: CTN
Origin: Zhejiang, China
The products are suitable for connecting parts of fluid ducts. The operating temperature is -20ºC to 110ºC and the operating pressure is ≤2.5Mpa.


Operaturing Mediums: Water, unsaturated vapor, compressed air, oil&grease, weak acid, weak alkali and appropriate refrigerants, which should have weak corrosivity for brass


Applicable pipes:Aluminum plastic composite pipes, PE-X pipes, PERT pipes, PB pipes, etc..

The stamdard socket size is suitable for the aluminum plastic composite pipe. If use for other type of pipes, the socket size should match with the pipe wall thickness and the seal ring material should been replaced so that it can been compatible with the medium

Reducing straight - press fittings in brass for Multilayer Pipes (M-1)

Size: 16mm, 18mm, 20mm, 25mm, 26mm, 32mm, 40mm, 50mm, 63mm

Material: 58-2, CW617, 59-1, DR

With/without nickle plated

U profile, REMS's U-TYPE jaws are acceptted

Brass Fittings-Press Fittings- Reduced Straight
  The products are suitable for connecting parts of fluid ducts. The operating temperature is -20ºC to 110ºC and the operating pressure is ≤2.5Mpa.


Operaturing Mediums: Water, unsaturated vapor, compressed air, oil&grease, weak acid, weak alkali and appropriate refrigerants, which should have weak corrosivity for brass


Applicable pipes:Aluminum plastic composite pipes, PE-X pipes, PERT pipes, PB pipes, etc..

The stamdard socket size is suitable for the aluminum plastic composite pipe. If use for other type of pipes, the socket size should match with the pipe wall thickness and the seal ring material should been replaced so that it can been compatible with the medium

Reducing straight - press fittings in brass for Multilayer Pipes (M-1)

Size: 16mm, 18mm, 20mm, 25mm, 26mm, 32mm, 40mm, 50mm, 63mm

Material: 58-2, CW617, 59-1, DR

With/without nickle plated

U profile, REMS's U-TYPE jaws are acceptted

Brass Fittings-Press Fittings- Reduced Straight
 

Cryogenic Air Separation Unit

Cryogenic air separation units (ASUs) are built to provide nitrogen or oxygen and often co-produce argon. High purity oxygen, nitrogen, and argon, used for semiconductor device fabrication, require cryogenic distillation. Pure gases can be separated from air by first cooling it until it liquefies, then selectively distilling the components at their various boiling temperatures.

Doer can supply Cryogenic Air Separation Units with capacity ranging from 80-10,000 m3/h for industrial, medical or commercial applications.

Cryogenic Air Separation Unit,Oxygen Plant Air Separation Unit,Air Separation,Air Separation Unit

Atmospheric Flat Bottom Storage Tank, VPSA Oxygen Plant, Microbulk Storage Tank , https://www.doercryo.com