Car belt repair and maintenance to check regularly is the key
The car washing machine factory produces advanced car wash equipment, including automatic and fully automatic Car Wash Systems. Their fully automatic car wash equipment, also known as auto car wash equipment, provides an effortless and efficient way to clean a car. This system uses high-pressure sprayers, cleaning solutions, and powerful air dryers to deliver a spotless finish for the vehicle. Users just need to drive the car into the system, and the machine will handle the rest. With the factory's fully automatic car wash equipment, car washing has never been easier, saving time and effort in keeping cars clean and presentable. car wash equipment,automatic car wash equipment,fully automatic car wash equipment,auto car wash equipment Zhengzhou Shinewash Technology Co.,Ltd , https://www.shinewashtech.com
Vehicle maintenance is defined for the belt wear and ageing prevention of automotive engines. The rare root belts are defined at the front of the machine and each belt bears the primary result. On the proposal machine, various types of auxiliary machines are driven via belt drives, such as the shrinking machines for air conditioners, power steering pumps, and alternators. Assuming that the belt is broken, slippage may occur, which will cause the related auxiliary engine to lose its function, or reduce its function, and then affect the normal operation of the car.
The belt reflection method is very simple. First, introspect the tension of the belt. At this time, you can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10 kg. Assuming that the belt is about 10 mm in depression, it is considered that the belt tension is suitable for knocking. Assuming that the amount of reduction is excessive, the tension of the belt is considered to be insufficient. Assuming that there is almost no reduction in the belt, the tension of the belt is considered excessive. In the absence of tension, the belt is slippery. When the tension is too large, it is very easy to damage the bearings of various auxiliary machines. For this purpose, the relevant adjusting nuts or bolts should be loosened and the tension of the belt should be adjusted to the optimum shape.
In addition, car maintenance must also pay attention to the wear of the belt. Old belts are worn out and the contact area between belts and pulleys is drastically reduced. At this time, just press the belt with force and the belt sinks deep into the groove of the pulley. The belt rubber also has an aging problem. If the belt rubber is seriously aged, it must be changed in time.
The car engine is the brain of the car. If the engine is bad, it means that a car is useless. When a car is running on the road every day, if it takes a long time, it may cause the engine belt to wear out or be aging. Therefore, the owner usually begins to inspect the belt for a while to avoid unnecessary troubles.