Centrifugal Submersible DC Solar Sewage Irrigation Deep Well Water Pump
Sewage Solar Pump Sewage Solar Pump Convertible Soft Top For Mercedes Mercedes Soft Top,Mercedes Benz Soft Top,Mercedes Soft Top Convertible,Convertible Soft Top For Mercedes Wenzhou ShengMu Trading Co., Ltd. , https://www.smatuoparts.com
Product features:
3.Over voltage protection/under voltage protection.
When the voltage is too high or too low, the pump will stop working automatically. every 10 minutes detect . when the voltage is restored to 10v-22v, the pump will start automatically and start again.
4.The water pump can be connected directly to the solar panel in the sunlight without the controller.
Solar panel:
1. 12V solar water pump system, it is recommended to use working voltage (Voc) for about 18V, and open circuit voltage (Vmp) is about 22V single crystal silicon or polycrystalline silicon solar panel in parallel;
Installation:
1.If the pump works only in the sun, it can connect directly to the solar panel without a controller.A total of about 300 W (18V) of solar panels are needed.
2. If the pump needs to work at night or on a rainy day, use a battery and a controller.
Notes:
1.Cannot connect the positive and negative terminal of the pump.
2.The pump cant work under water shortage for a long time.
3.The pumps must be all submerged in water.
4.Cable requirement: 6 square or 10 square pure copper cable is recommended when the cable length is greater than 30 meters.
5.Pipe requirements: please do not select diameter of less than 25 mm pipe connecting pumps, pipe blockage is forbidden, bending, such as forced reduce pipe outlet diameter, increase the behavior of the head, otherwise it will cause the pump working current is too high, motor damage, by the causes of damage are not within warranty scope.
6.It is strictly forbidden to use pump over the rated head.
Solar pump Controller:
For more details, pls contact with us !
Product features:
3.Over voltage protection/under voltage protection.
When the voltage is too high or too low, the pump will stop working automatically. every 10 minutes detect . when the voltage is restored to 10v-22v, the pump will start automatically and start again.
4.The water pump can be connected directly to the solar panel in the sunlight without the controller.
Solar panel:
1. 12V solar water pump system, it is recommended to use working voltage (Voc) for about 18V, and open circuit voltage (Vmp) is about 22V single crystal silicon or polycrystalline silicon solar panel in parallel;
Installation:
1.If the pump works only in the sun, it can connect directly to the solar panel without a controller.A total of about 300 W (18V) of solar panels are needed.
2. If the pump needs to work at night or on a rainy day, use a battery and a controller.
Notes:
1.Cannot connect the positive and negative terminal of the pump.
2.The pump cant work under water shortage for a long time.
3.The pumps must be all submerged in water.
4.Cable requirement: 6 square or 10 square pure copper cable is recommended when the cable length is greater than 30 meters.
5.Pipe requirements: please do not select diameter of less than 25 mm pipe connecting pumps, pipe blockage is forbidden, bending, such as forced reduce pipe outlet diameter, increase the behavior of the head, otherwise it will cause the pump working current is too high, motor damage, by the causes of damage are not within warranty scope.
6.It is strictly forbidden to use pump over the rated head.
Solar pump Controller:
For more details, pls contact with us !