Coiled Tubing Tools Swivel Joint Motor Running/Pulling
February 06, 2023
Model NO.: CTTM
Standard: API 11d1
Trademark: Serva
Transport Package: Export Standard
Origin: China
Model NO.: CTTM
Standard: API 11d1
Trademark: Serva
Transport Package: Export Standard
Origin: China
COILED TUBING TOOLS
LOCKING SWIVEL JOINT The Locking Swivel Joint was designed to allow the assembly of long coil tubing strings with minimum lubricator length. Many times it is necessary to have long lengths of lubricator to accommodate the tool string, creating a difficult and dangerous situation. Now with the Locking Swivel Joint, it allows for sections of the tool string to be made up and lowered into the well bore. The String is spaced out and a pup joint is inserted, allowing the pup joint to seal in the rams of the BOP. The Locking Swivel is placed on top of the section of tools and dropped in the lubricator. Pull the coupling back and tighten the set screws, allowing the clutches to disengage and letting the swivel free spin. The other section of tool string can now be assembled. Before lowering the swivel in the hole, loosen the set screws so the coupling can slide back down, engaging the clutches. If rotation is required in the tool string, simply take the brass drive pins out from under the coupling and this will prevent any back torque through the string. If run below the motor the clutches must be engaged and brass drive pins installed.
SPECIFICATIONS
Part Number
Max OD
Min ID
Thread
(in)
(in)
D97-3168-500
1.687
0.531
1" AMMT
D97-3175-500
1.750
0.560
D97-3212-500
2.125
0.812
1.5"AMMT
D97-3225-500
2.250
D97-3287-500
2.875
1.000
2 3/8"PAC
D97-3312-500
3.125
1.500
2 7/8"PAC
D97-3350-500
3.500
MOTORHEAD ASSEMBLYÂ The Motorhead Assembly (M.A) has been developed in recognition to industry demands for compact, heavy duty, integrated BHA components. The M.A combines the Double Flapper Check Valve with the Heavy Duty Hydraulic Disconnect and the Dual Circulation Valve, standard components for virtually all tool string designs. The tubing connector has been deliberately eliminated to give the added flexibility of operator choice for the connector type and coil tubing size. The M.A. provides the operator with a compact, versatile, upper BHA and offers the following features:
The M.A's compact design gives an overall length saving of approximately 30% over the use of conventional individual components.
The high torque capability of the M.A. provides the ideal Motorhead for today's high demand coiled tubing drilling applications.
The choice of tubing connector is not dictated by the M.A., therefore giving the operator the flexibility to choose the most appropriate connector to suit the application.
With a considerable reduction in the number of component parts, seals and thread connections, the M.A. is uncomplicated to assemble/disassemble and inexpensive to redress.
SPECIFICATIONS
Part Number
Max OD
Min ID
Thread
(in)
(in)
D96-1168-200
1.687
0.406
1" AMMT
D96-1175-200
1.750
D96-1212-200
2.125
1.5" AMMT
D96-1237-200
2.375
0.625
D96-1287-200
2.875
0.750
2 3/8" PAC
D96-1312-200
3.125
0.812
MOTOR A positive displacement drilling motor that uses hydraulic horsepower of the drilling fluid to drive the drill bit. Mud motors are used extensively in directional drilling and coiled tubing operations and can be assemble with a variety of power section to meet the customers well conditions. From hot holes to harmful power fluids such as drilling mud or nitrogen. When ordering specify these parameters to provide the best power section do the job quickly and get the most life out of your motors.
SPECIFICATIONS
Part Number
Max OD
Lobe
Stage
Flow rate
Working torque
Rotory speed
Thread
(in)
L/min
N.m
R/min
D96-1169-100
1.687
5:6
5.0
90-210
280
390-860
1"AMMT
D96-1169-101
1.687
5:6
3.0
90-170
180
400-720
D96-1212-100
2.125
5:6
6.0
80-190
430
260-640
1 1/2"AMMT
D96-1212-101
2.125
5:6
2.5
110-230
350
200-400
D96-1287-100
2.875
5:6
4.0
90-380
890
100-420
2 3/8"PAC
D96-1287-101
2.875
7:8
4.5
190-470
1045
140-360
D96-1312-100
3.125
5:6
3.5
380-660
1450
230-390
"GS" TYPE RUNNING/PULLING TOOL The *GS* Type Running/Pulling Tool is designed to run and retrieve downhole tools with conventional internal fish necks. The latching mechanism is a robust dog/core design which releases positively from the internal fish neck when a hydraulic differential is applied to the tool. The tool does not require shear pins or drop balls since the differential required to activate the tool is provided by circulating through a choke insert in the core. 'GS' Type Running/Pulling Tools are available for all standard internal fish neck sizes. Features/Benefits:
Full hydraulic operation
Multiple latch & release capability
Proven dog/core design
Available to catch internal fish necks from 2" to 7"
1. High quality imported Compressor energy saving and low noise.Compressor brand Embraco and Danfoss is available for customers to choose. 2. Toughened heated glass, anti condensation and energy saving and good visual effect. 3. LED light in illumination, avoiding glaring. 4. Independent electronic board and cooling system, can be easily taken out for maintenance or replacement. 5. Environment-friendly CFC-free Refrigerant R134a or R404a.