Design Gateway New Logic Analyzer
Marine Electro-hydraulic Windlass The windlass is installed on the main deck of the ship's bow, which is used for the ship to lift the anchor and drop the mooring cable. Marine Electro-Hydraulic Windlass,Windlass Anchor,Electric Windlass,Manual Windlass TAIXING HAITAI GLOBAL TRADE CO.,LTD , https://www.jshaitship.com
The analyzer is compact, portable, easy to operate, and requires no external power supply. It has a sampling rate of up to 400MHz and has up to 32 input channels and 8MB of buffer. In addition, it has multiple waveform windows, timing differential pointer measurement, waveform and scheme protection/repair, and I2, RS232C bus analyzer functions.
The new logic analyzer measures 116 x 73.3 x 23 mm and its hardware configuration includes a 2.54 mm pin (32ch, internal/external clock), a 5V TTL/3.3V CMOS input voltage, and a 0.2MHz to 400MHz external clock. Accessories have 32 cables, 2 test probes, 1 USB cable and 1 CD-ROM
Windlass can be divided into manual, electric, hydraulic, pneumatic, etc. according to the driving form.
The windlass can be divided into several specifications such as φ12--φ120mm according to the diameter of the anchor chain.
Windlass can be divided into single-sided and double-sided according to the distribution of drums.
The windlass is mainly composed of base, bracket, chain wheel, brake, chain wheel, gearbox, electric control system (except manual windlass), etc. Electric windlasses have electric motors, and hydraulic windlasses have hydraulic pump stations.
The main technical indicators of the windlass include the diameter of the anchor chain, the nominal speed of the anchor, the rated load, the supporting load, several levels of speed change, electrical system, etc. The installation of the windlass on the ship should ensure that the wrap angle between the anchor chain and the sprocket is 117-120°.
Electric windlass
The electric motor directly drives the windlass, and the drive shaft is driven by the gear box to work, and the structure is simple; it is generally suitable for windlasses with an anchor chain diameter of 16mm-93mm.
hydraulic windlass
It is suitable for windlass with anchor chain diameter of 16mm-120mm. Hydraulic windlasses are also called electro-hydraulic windlasses. It drives the oil pump with a motor, drives the motor with high-pressure oil, and then drives the transmission gear through a reducer (or no reducer). To make the windlass run, its structure is relatively compact and its volume is small. Now there has been an automatic hydraulic windlass, which is equipped with an anchor chain length sensor. When the anchor chain needs to be thrown out, the windlass will automatically stop; , can automatically decelerate; the anchor will automatically stop when it enters the anchor chain drum and is properly received.