Four steps maintenance high pressure cleaning car
Classification of tablet press: Models can be divided into single punch tablet press, rotary tablet press, sub-high speed rotary tablet press, automatic high speed tablet press and rotary core tablet press.
The sheet shape pressed by the tablet press is initially flat circular, and later developed into shallow circular arc and deep circular arc on both sides, which is for the need of coating. With the development of special-shaped tablet press, oval, triangle, oblong, square, diamond, circular ring tablets followed. In addition, with the continuous development of preparations, due to the requirements of compound preparations and timed release preparations, special tablets such as double layer, triple layer and core coating are made, which need to be completed on special tablet press.
Rotary tablet press is a machine which is made of several pairs of die distributed on the turntable to make a circular lifting movement according to a certain track and press the granular material into tablet through the press wheel. And the stamping rod with the rotary table rotating speed ≥60m/min line press is called high-speed rotary tablet press, this high-speed rotary tablet press has a forced feeding mechanism, the machine is controlled by PLC, has the automatic adjustment of pressure, control the weight of the piece, eliminate the waste piece, print data, display fault shutdown and other functions, in addition to the control of the weight difference within a certain range, Quality problems such as missing Angle and loose lobe can be automatically identified and eliminated.
With the development of market demand, the scope of application of tablet press is more and more wide, no longer simply limited to the suppression of Chinese and Western medicine tablets, more widely suppressed health food, veterinary medicine tablets, chemical tablets: such as mothballs, washing blocks, smurf blocks, art powder, pesticide tablets, food tablets: chicken essence block, isatis root block, divine Qu tea block, compressed biscuits.
Rotary Tablet Press,Tablet Press,Tablet Machine,Tablet Maker,Pill Machine JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.xuantengmachine.com
3 is to wipe, use a car wash sponge shampoo car shampoo, wipe the body again, if contaminated objects are not easy to remove, you can repeatedly wipe, pay attention to wipe the body up and down the sponge to be used separately, so as not to scratch the body under the sand paint body paint. Then rinse with high-pressure water, especially to clean the car seams, foam and other residues at the corner;
4. Apply liquid to spill the shampoo car wash on the body. There are two methods, one is to use multi-functional high-pressure foam washing machine, spray evenly, to the upper and lower regularly shaking nozzle; the second is manual preparation, that is, according to a certain proportion of shampoo car wash liquid, do not use washing powder, soapy water, Dewaxing detergent.
In the case of flushing the grille in front of the car with a high-pressure cleaner, misty water flow should be used. Water column should not be flushed against the fins of the water tank or condenser. If the plastic arch cover is installed on the fender, it should be removed and cleaned. Thoroughly clean the mudguard and the inside of the fenders.