Fresh Aquarium Transporter Profile and Features
Fresh seafood transport vehicles, also known as live fish transport vehicles, seafood transport vehicles, aquatic product transport vehicles, pull-fish and so on. He is using biology, water environmental engineering, aquaculture, aquaculture water treatment engineering and other principles, combined with automatic control, high-efficiency decontamination, high-pressure oxygen, biological filtration and many other modern high-tech, suitable for freshwater fish and shrimp Aquatic products such as shrimp, crabs, shellfish and other aquatic products have long-distance high-density live transport for a long period of time. It has been proved that the survival rate is as high as 99%, and all technical indicators rank at the leading level of similar products at home and abroad. According to the fresh aquatic product transporter, the tank can be divided into open type and sealed type. The former is a square and rectangular water tank, and the latter is an oil tank inclined water tank. The use of advanced glass steel or carbon steel tank transport, compared with air transport, large transport costs, low transport costs; compared with canvas tanks, wooden tanks, high survival rate, good insulation properties. The aerobic system in the cabinet: Spray, Pure oxygen, Inflatable and Jet. Spray type is pumped by high-pressure pump or self-priming pump bottom tank water to the top of the tank opening tube, spraying oxygen to the water surface; pure oxygen is the use of oxygen bottle through the relief valve to supply pure oxygen, leading to the sealed gas Diffusion tube at the bottom of the water mixing box; Inflated type is supplied by the compressor with compressed air, leading to the bottom hole of the tank, so that the oxygen in the air dissolves into the water; The jet type is using high pressure water flow through the nozzle of the jet nozzle to spray water, resulting in the trail To negative pressure, air is drawn into the mixing section and then injected into the upper water tank of the fish tank through the diffusion tube. Live fish boxes are generally equipped with 2 to 3 sets of jets. When the water temperature is 20°C, the fish-water ratio is 1:1, and the fish-water ratio at 30°C is 1:2. Minor changes can also be used as fry and fingerling transport. Ultra-high frequency induction heating equipment is a kind of equipment developed for surface quenching by applying electromagnetic induction principle and modern power electronic technology. Surface heat treatment process in which the workpiece is heated locally by an induced current. This heat treatment process is often used for surface quenching, but can also be used for local annealing or tempering, and sometimes for bulk quenching and tempering. UHF,UHF Heater,Ultra High Frequency,UHF Heating Equipment Ningbo Yufeng Electronics Co., Ltd , https://www.yufengheating.com
Uhf induction heating equipment adopts IGBT efficacy, soft switching resonant dual control and frequency automatic tracking system, MOSFET devices and unique frequency conversion technology, high frequency operation is stable. Uhf INDUCTION heating equipment with constant current and power control function, greatly optimize the metal heating process. Under the same conditions, it has 50% energy saving compared with the traditional high cycle electron tube heating equipment, no high cycle radiation, no high cycle drying. Reduced power load and power capacity, with 100% full load design, UHF induction heating equipment can work continuously for 24 hours without interruption. With automatic heating, insulation, cooling three periods of function Settings, is conducive to improve the heating quality of UHF induction heating equipment, simplified manual operation. Uhf induction heating equipment can be selected according to the power and frequency. The higher the high frequency, the shallower the heating depth, and the lower the high frequency, the better the diathermy. Induction heater 1 ~ 20KHZ high frequency automatic tracking.
UHF heating equipment has the advantages of high frequency, small size, light weight, energy saving, solid and beautiful solder joints, almost unlimited welding part shape, surface pattern will not be damaged, the metal internal crystal structure unchanged, small annealing range and so on. , no obvious welding scar, widely used in metal glass manufacturing, electrical and electronic industry connector welding, small relay internal non-contact welding, refrigeration industry high pressure welding, jewelry industry parts welding, manufacturing metal jewelry and process welding.