High Efficiency Slag Dryer Machine/ Slag Drier with Good Price
February 18, 2024
Model NO.: SKW
Movement Way: Fixed
Type of Flow: Parallel Flow
Type of Atomization: Gas Atomization
Sprayer: Air-Flowing Type
Material: Q235B Carbon Steel Plate or as Client Requirement
Installation: Supplier Dispatch Engineer
Voltage: 380 V Others
Power(W): 5.5-110 Kw
Dimension(L*W*H): Different Model Different
Weight: 6- 300 Ton
Certification: CE, ISO9001:2000
Warranty: Two Years
Application: Construction,Metallurgical,Mining Industry etc
Drying Temperature: 200-1000 Degree
Trademark: KZ
Specification: CE, ISO
Origin: Zhengzhou, China
HS Code: 8419399090
          High efficiency slag dryer machine/ slag drier with good priceslag dryer performance characteristics
1.slag dryer has great handling ability, fuel consumption less, low drying cost.
2.High temperature resistant, this dryer can use high temperature and hot air to dry materials rapidly.
3.slag dryer expanded ability is strong, design considered production surplus, even if yield increased slightly, also need not changing equipment.
4.slag dry adopts "self-aligning type" tug structure,tug match up well with rolling ring, and greatly reduce wear and power consumption.
5.Special designed catch wheel structure, greatly reduces tilt of the equipment
 which work provides the horizontal thrust.
6.Environmental protection.
7.Dry and moisture control, minimum up to 5% or less, meet material widely.
slag dryer operating principle
1. A rolling cylinder which slightly inclines is the main part of slag dryer. The wetÂ
materials are fed from the higher end of the cylinder when the heating media are
 being sent through the lower end.
2. Under influence of the gravity,wet materials flow downwards to the lower end and contact the heating media directly or indirectly.
3. There is a stirring plate on the inner wall of the cylinder toÂ
stir materials continuously and make them have a full contact with air stream.Â
slag dryer structure
1.slag dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.
2.slag dryer is mainly composed of shell, back and forth supporting wheel, feedingÂ
and discharging unit and gear cap.
3. The accessories which are not in the scope of this machine include firebox,
 feeding and discharging equipment, dust catcher, etc.
Main technical parameters of slag dryer machine:
 Â
| Model | Diameter (m) |
Length (m) |
speed (r/min) |
Installation obliquity (%) |
Drying temperature (°c) |
Capacity (t/h) |
Motor (kw) |
Weight (ton) Â |
| Φ0.8x8 | 0.8  |
8 | 3-6 | 3-5% | ≥800 | 0.6-0.8 | 3 | 3.5 |
| Φ1.0x10 | 1.0  |
10 | 3-6 | 3-5% | ≥800 | 1-1.5 | 4 | 7 |
| Φ1.0x12 | 1.0  |
12 | 3-6 | 3-5% | ≥800 | 1.5-1.8 | 4 | 8 |
| Φ1.0x15 | 1.0  |
15 | 3-6 | 3-5% | ≥800 | 1.5-2 | 5.5 | 10 |
| Φ1.2x10 | 1.2  |
10 | 3-6 | 3-5% | ≥800 | 1.8-2 | 7.5 | 14 |
| Φ1.2x12 | 1.2  |
12 | 3-6 | 3-5% | ≥800 | 2-3 | 11 | 15 |
| Φ1.2x15 | 1.2  |
15 | 3-6 | 3-5% | ≥800 | 2.5-3 | 11 | 18 |
| Φ1.5x15 | 1.5  |
15 | 3-6 | 3-5% | ≥800 | 3-3.5 | 15 | 20 |
| Φ1.5x18 | 1.5  |
18 | 3-6 | 3-5% | ≥800 | 3.5-4 | 15 | 23.5 |
| Φ1.5x20 | 1.5  |
20 | 3-6 | 3-5% | ≥800 | 4.0-4.5 | 15 | 25 |
| Φ1.8x15 | 1.8  |
15 | 3-6 | 3-5% | ≥800 | 4.5-5.0 | 18,5 | 28 |
| Φ1.8x18 | 1.8  |
18 | 3-6 | 3-5% | ≥800 | 5.0-5.5 | 18.5 | 30 |
| Φ1.8x20 | 1.8  |
20 | 3-6 | 3-5% | ≥800 | 5.5 | 18.5 | 33 |
| Φ2.0x15 | 2.0  |
15 | 3-6 | 3-5% | ≥800 | 5.5-6 | 18.5 | 35 |
| Φ2.0x18 | 2.0  |
18 | 3-6 | 3-5% | ≥800 | 6-6.5 | 18.5 | 42 |
| Φ2.0x20 | 2.0  |
20 | 3-6 | 3-5% | ≥800 | 6.5-6.8 | 18.5 | 50 |
| Φ2.2x20 | 2.2  |
20 | 3-6 | 3-5% | ≥800 | 6.5-7.0 | 22 | 56 |
| Φ2.2x22 | 2.2  |
22 | 3-6 | 3-5% | ≥800 | 7.0-7.5 | 22 | 58 |
| Φ2.4x20 | 2.4  |
20 | 3-6 | 3-5% | ≥800 | 7.5-8 | 30 | 60 |
| Φ2.5x20 | 2.5  |
20 | 3-5 | 3-5% | ≥800 | 8-9 | 30 | 63 |
| Φ2.5x25 | 2.5  |
25 | 3-5 | 3-5% | ≥800 | 10-11 | 37 | 68 |
| Φ2.6x20 | 2.6  |
20 | 3-5 | 3-5% | ≥800 | 9-10 | 37 | 65 |
| Φ2.6x25 | 2.6  |
25 | 3-5 | 3-5% | ≥800 | 11-12 | 37 | 73 |
| Φ2.6x30 | 2.6  |
30 | 3-5 | 3-5% | ≥800 | 15-18 | 45 | 80 |
| Φ2.8x20 | 2.8  |
20 | 3-5 | 3-5% | ≥800 | 13-15 | 45 | 75 |
| Φ2.8x22 | 2.8  |
22 | 3-5 | 3-5% | ≥800 | 15-16 | 45 | 78 |
| Φ2.8x30 | 2.8  |
30 | 3-5 | 3-5% | ≥800 | 18-20 | 55 | 83 |
| Φ3.0x20 | 3.0  |
20 | 3-5 | 3-5% | ≥800 | 18-20 | 55 | 78 |
| Φ3.0x22 | 3.0  |
22 | 3-5 | 3-5% | ≥800 | 20-25 | 55 | 80 |
| Φ3.0x30 | 3.0  |
30 | 3-5 | 3-5% | ≥800 | 25-28 | 75 | 90 |
Cummins Parts,Flywheel Sheel,Engine Oil Pump,Piston Pin Spare Parts
Jining BST Import and Export Co.,Ltd , https://www.komatsucatparts.com