Model NO.: HF-15KW-2KG
Application: Heating, Quenching, Forging, Melting, Welding
Power: 15kw
Frequency: 30-100kHz
Capacity: 2kg
Trademark: ORD
Transport Package: Wooden Box
Specification: CE, SGS, ISO
Origin: China
HS Code: 8514400090
Model NO.: HF-15KW-2KG
Application: Heating, Quenching, Forging, Melting, Welding
Power: 15kw
Frequency: 30-100kHz
Capacity: 2kg
Trademark: ORD
Transport Package: Wooden Box
Specification: CE, SGS, ISO
Origin: China
HS Code: 8514400090
Induction Heating  Melting Furnace :




Advantage:
1 More than 19Â years experience, stable and goods performance
2 CE certificated
3 Copperated with CHOW TAI FOOKS, Matsushita, Foxconn, Media, Gree AND ZHIGAO Air conditioner.
4 Suitable for a large range, heating, quenching, forging, melting, solding and so on.
5 IGBT Type, other factory almost are used the Mosfet type
Main characteristics:1 Siemens IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2 100% Duty cycle, continuous working is allowed at maximum power output.
3Display of heating power and heating current and oscillating frequency;
4 Simple to install, Installation can be done by unprofessional person very easily;
5 Light weight
7 Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
 Type |
HF-15AB/15A |
 Work Power |
220V,230V,240VÂ 50-60hz 380V*3Phase |
 The range of operating voltage |
 200-260VAC   340-430V |
 Output power |
 15KW |
 Input current |
36A |
 Fluctuating frequency |
 30-100khz |
 Timing (Heat time,Retain time,Cool time) |
 1-99S |
 The flow rate of cooling water |
 0.15 Mpa 7.6L/Min |
 Water temperature protection point |
 40centidegree |
 Duty cycle |
 100% (40degree room temperature) |
 Weight |
36Kg |
 Size |
Main Parts:640*280*550mm  |
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.Â
2. Inquiry and consulting support.Â
3. Sample testing support.Â
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
 technician to provide visiting service after checking with the customer and charge for a favorable price.Â
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Induction Heating  Melting Furnace :




Advantage:
1 More than 19Â years experience, stable and goods performance
2 CE certificated
3 Copperated with CHOW TAI FOOKS, Matsushita, Foxconn, Media, Gree AND ZHIGAO Air conditioner.
4 Suitable for a large range, heating, quenching, forging, melting, solding and so on.
5 IGBT Type, other factory almost are used the Mosfet type
Main characteristics:1 Siemens IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2 100% Duty cycle, continuous working is allowed at maximum power output.
3Display of heating power and heating current and oscillating frequency;
4 Simple to install, Installation can be done by unprofessional person very easily;
5 Light weight
7 Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
 Type |
HF-15AB/15A |
 Work Power |
220V,230V,240VÂ 50-60hz 380V*3Phase |
 The range of operating voltage |
 200-260VAC   340-430V |
 Output power |
 15KW |
 Input current |
36A |
 Fluctuating frequency |
 30-100khz |
 Timing (Heat time,Retain time,Cool time) |
 1-99S |
 The flow rate of cooling water |
 0.15 Mpa 7.6L/Min |
 Water temperature protection point |
 40centidegree |
 Duty cycle |
 100% (40degree room temperature) |
 Weight |
36Kg |
 Size |
Main Parts:640*280*550mm  |
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.Â
2. Inquiry and consulting support.Â
3. Sample testing support.Â
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
 technician to provide visiting service after checking with the customer and charge for a favorable price.Â
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Polyether Polyols For Polymeric Polyols
The products used in cold-cured,high resilient foam, can increase the compression strength of foam products, improve cell structure and increase the property of foam-cell.
The products widely used in General foam, super high hardness soft foam, hot molding foam,high rebound, half hard foam.
The formulations can be adjusted according to customer requirements.
Polyether Polyols For Polymeric Polyols,Ether Polyol,Caradol Polyols,Polymeric Polyols
NINGBO LUCKY CHEMICAL INDUSTRY CO. LTD , https://www.nbluckychem.com