How to adjust the discharge port of the cone crusher?

June 18, 2024

During the crushing process, the moving cone liner and the fixed cone liner are continuously worn, so that the discharge port is gradually increased. In order to ensure a certain product size, it is necessary to continuously adjust the size of the discharge port with the wear and tear. The adjustment of the discharge port is realized by means of the zigzag thread lifting and lowering cone liner between the adjusting ring and the support sleeve.

In order to lubricate the toothed threads and to facilitate adjustment and disassembly, the threads must have sufficient clearance.
Adjusted port of discharge, using methods based lead wire ball, to the crushing chamber through the port of discharge at the discharge mouth size measurement. The new processed liner can be measured at one point, and the unprocessed or worn liner should be measured between 6 and 8 points. After the discharge port has reached the size requirement, the adjustment ring is locked by the lock cylinder, otherwise it is not allowed to start.
Customized Rubber Seals
Customized Rubber Seals,Rubber Gasket,Rubber Gasket Sheet,Rubber Gasket Seal
Ningbo Robon Sealing CO.,LTD , https://www.zjrboorb.com