For an electrician, there are complex considerations for wiring a factory. At the same time, he also needs to take into account the lives of workers. So, the electrician's work is so sacred. They need to think about installing the circuit continuously. How to install the LED explosion-proof lamp?
First, for the LED explosion-proof light, the choice of location is very important. It should be placed on electrical routes that are less explosive or located farther away from the source of release.
Second, how to set up electrical appliances? Explosion hazard electrical routes include explosion-proof steel pipe wiring and cable wiring. They are different for different types. The next step is to isolate the seals. Whether it is the channel of an electrical circuit or a protective tube, cable, or steel pipe, the partition between areas with different levels of explosion danger zone is to be sealed, and some non-rigid materials should be used. Blocking, this is beyond doubt.
Third, the choice of wire materials, because the explosion hazard is not painful, so the material is certainly not the same. The most serious and dangerous environment requires the use of stranded copper conductors or cables. The smaller the conductor or cable, the smaller the cross-sectional area. This is followed by the problem of current carrying capacity. Since the cross section of the conductor or cable is not painful, the current carrying capacity must also be strictly controlled. No more, or a short circuit may occur.
Fourth, the connection of the electrical circuit, after all the measurements have been measured in advance, as long as the wiring is connected, there will not be much problem.
The work of the electrician is complicated. Because the meaning of the explosion-proof lamp is more complicated, there are many places to pay attention to when installing the circuit. Explosion-proof lamps are not used only once, so the line is very important.
Technical Parameters:
Specifications Model: RTB97-II
Explosion-proof mark: Exdemb II CT4
Rated voltage: AC220V 50HZ
Rated power: 80/10/120/140/160/180/200w
Power factor: 0.98
Luminous flux: 5500~13200LM
Protection class: IP66
Anti-corrosion level: WF2
Introduction device: G3/4" inlet specification, suitable Φ 8m～Φ12m cable
Terminals: ≤2.5mm2 wire reliable connection
Lamp size: 240*200*135mm
Whole light weight: 4KG
Prepainted Stainless Steel
Stainless steel color coating is a process that involves coating stainless steel with a colored finish. This finish can be achieved through a variety of methods, including painting, powder coating, and PVD (Physical Vapor Deposition) coating. Stainless steel color coating offers a range of benefits and can be used in a variety of applications.
Application Fields:
Stainless steel color coating is widely used in the architectural field for building facades, interior design elements, and signage. It can also be used in the automotive industry for trim and decorative elements, as well as in the electronics industry for casings and components.
Advantages:
1. Aesthetic appeal: Stainless steel color coating can provide a range of color options, allowing designers and architects to create unique and visually appealing designs. It can also be customized to match specific color schemes.
2. Durability: Stainless steel is already known for its durability, and color coating can add an extra layer of protection against corrosion, scratches, and other forms of damage.
3. Low maintenance: Stainless steel color coating is easy to clean and maintain, requiring only mild soap and water to keep it looking its best.
4. Environmental benefits: Stainless steel is a sustainable material, and color coating can further increase its longevity and reduce the need for replacement.
Case Study:
One example of the use of stainless steel color coating is in the renovation of the iconic Empire State Building in New York City. The building's exterior was updated with a new stainless steel façade, which was color coated in a custom silver finish. The color coating not only provided a unique aesthetic, but also helped to protect the steel from corrosion and other forms of damage. Additionally, the new façade helped to improve the building's energy efficiency, reducing its carbon footprint.
Prepainted Stainless Steel,Painted Stainless Steel,Camouflage Corrugated Steel Sheet,Camouflage Pre Painted Steel Coils
Wuxi Shengshu Metal Co., Ltd. , https://www.wuxissmetal.com
