Is driving safety related to time? Take special care during these 3 time periods!
The hydraulic two-arm bolting jumbo for coal mines is a new type of roadway support mechanical equipment. The machine is used in conjunction with the roadheader and the drilling unit to quickly complete the support work, achieve operational balance, and improve mechanization. Mainly used for coal rock and semi-coal rock roadway working face support operations. It can simultaneously realize the support of roadway top and side bars with bolts and cables. It also has the functions of drilling blast holes and detecting holes (water control, gas detection) in the coal seam. Bolter Jumbo,Bolting Jumbo,Loader Drill Rig,Hydraulic Bolting Jumbo NORTH HEAVY GRYPS EQUIPMENT AND ENGINEERING CO.,LTD , https://www.nhgtunnel.com
There is a magical thing in the human body called the "biological clock." It also affects the safety of driving. Do you know?
During the day, the driver will experience three dangerous times and need to be extra vigilant: From 11pm to 4am, it is usually sleep time. At this time, driving is easy to be sleepy. From 12 to 2pm, especially in the summer, Hot weather can make people apathetic; from 5 to 7 in the afternoon, they are tired for a day and they are prone to confusion, misjudgment, and lack of concentration.
Then, what safety precautions should be paid attention to at night?
1. Drive at night, be sure to control the speed, ready to stop at any time, 70% of traffic accidents are caused by excessive speed.
2, the driver's reaction will decline at night, so at night when driving should reduce the speed, pay attention to the distance with the car, especially in poor light, must slow down, in distress to the location, should stop to see, see the situation after the march .
3, avoid fatigue driving, must have sufficient rest before driving, or a cup of coffee, in order to ensure energetic. If you feel sleepy while driving, be sure to stop and rest and don't stretch hard.
4. When the vehicle is temporarily parked or stopped for any reason, the width light and license plate light should always be turned on.
5. When driving on roads with street lights, try to use anti-glare lights or low-beam and wide-width lights. Do not abuse high beam lights. When passing the intersection, the speed should be decelerated at a distance of 50-100 meters from the intersection, and the high beam light should be turned into a low beam light. At the same time, the turn signal should be turned on to indicate the direction of travel.
6, some old drivers often say that at night driving "go ash does not go black", "go ash does not go white, see black stop", in short, in the moonless night, the road is generally gray and black, outside the road is a black; Where there is water, it will be reflective, while the pit will be darker.
7. When reversing or turning around, you must get off to find out the safety and boundary of the terrain, up and down and around, and then reverse or turn around.
8, according to the changes in the lighting conditions of the front to determine the terrain, such as the shorter beam may be encountered on the curve or uphill, the light beam may also be a long downhill, a gap in the light column may be pits on the road and so on. According to the illumination of the light from the side road, the driving situation of the opponent vehicle is predicted. If the intersection has scattered light from the front vehicle's high beam, it can be judged that the car is still far away from the intersection. If the big light has a beam of light or there is a bright light on the corners of the corners of the intersection, be prepared for the trip.