Learning advanced technology is the basis for filtering equipment to enhance core competition
Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength. Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com
Filtration equipment is an important equipment for water quality pretreatment. It can effectively remove impurities such as suspended solids, colloids, sediments, clays, humins, and particulate matter in water bodies, reduce the turbidity of water, and achieve the purpose of clarification of water quality. Wide range of applications.
At present, there are different types of filtration equipment on the market, including filters, filters, filters, etc. Among them, filters are the most widely used filtration equipment on the market, occupying half of the domestic filtration equipment market, and the market share has reached 53%, followed by filters and filters accounted for 15% and 13%, respectively, grease filtration equipment and other filtration equipment industry accounted for 10% and 9%.
For filtration equipment, the filtering effect is undoubtedly the most important performance indicator and the core competitiveness of the equipment. At present, the new type of industry continues to develop and the technological level of filtration equipment continues to increase.
Throughout the entire filtration equipment industry, foreign filter equipment has a high degree of automation, and some special filtration equipment has emerged. At the same time, emphasis has been placed on the enhancement and auxiliary measures of the filtration process, which has greatly improved the filtering effect of the filtering equipment. In contrast, in the domestic filtration equipment industry, although the current industry has developed rapidly, it has basically formed a market system, but the domestic equipment has not achieved a high rate of satisfaction with the market, and there is a big difference between the equipment efficiency and foreign advanced level.
Therefore, in the future development of the filtration equipment industry, we must learn from the good experience of foreign companies, learn and introduce advanced technologies, and only by continuous innovation can we meet the needs of market development, and we can truly go abroad.
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.