Shuangyang Lighting After-sales Description: 4 suggestions for lamp maintenance
Stainless steel Stock pot manufacturer in China
A stock pot can be used to make stock,broth,cooking stews,porridge,boiled foods,steamed shellfish,and many kinds of recipes.It is one of the most common types of cooking pot used worldwide.It is a wide pot with a flat bottom,straight sides,a wide opeaning to the full diameter of the pot,two handles on the sides,and a lid with a handle on top.We have variety of sizes to meet any need from cooking for a family to preparing food for a banquet.We are professional manufacturer of stainless steel cookware in Jiangmen.All of our products need to pass strict inspection before shipment.
Stainless Steel Stock Pot,Stock Pot,Large Stock Pot,Large Cooking Pots Jiangmen Yuesheng Metal Products Co., Ltd. , https://www.hkbestgain.com
[Lighting net] Home lighting does not get the cleaning and maintenance it deserves, and the high-end lamps will soon be dull. Luminaires need regular cleaning and maintenance to maintain the brightness of the lighting and extend the life of the lighting. The lampshade is dimly lit by dust, and if not treated in time, it reduces the brightness by about 30% on average every year. Therefore, it is especially important to clean the lampshade and the lamp or bulb regularly.
Therefore, the author specially interviewed Ms. Wang, Shuangyang Lighting Service Department, who provided us with 4 points of lamp maintenance advice:
First, after buying the lamp, don't be busy installing it. You should carefully look at the lamp's mark and read the installation and operation manual, and then install and use the lamp according to the instructions. Otherwise, danger may occur;
Secondly, replace the aging lamp with the light source parameters provided by the sign, and find that the two ends of the lamp are red, the lamp is black or there is a black shadow, and the lamp is not bright, the lamp should be replaced in time to prevent the occurrence of ballast. Unsafe phenomena such as burnout of the device;
Third, during cleaning and maintenance, care should be taken not to change the structure of the luminaire, and do not replace the parts of the luminaire casually. After the cleaning and maintenance is finished, the luminaire should be installed as it is, and the parts of the luminaire should not be missed or misplaced;
Fourth, the lamps should be strengthened during use to extend their service life. The lamp of the room should always be wiped with a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; the lamp installed in the toilet and bathroom must be equipped with a moisture-proof lampshade, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to anti-smoke, because the accumulation of grease stains affects the illumination of the lamp; the light-colored lampshade has good transparency, but it is easy to stick to the ash, so it should be diligently wiped to avoid affecting the penetration of light; If the luminaire is non-metallic, use a damp cloth to prevent dust from accumulating and hinder the lighting effect.