Stainless Steel Submersible Pump for Seawater Rig Cooling System
Cnc Turning is namely Lathe machining, Lathe machining is a portion of mechanical processing.
Lathe machining is always a process that turning tools doing turning machining to a rotary workpiece. On CNC lathes, the operators or the engineers also can use drills, reamers, screw taps, threading dies and knurling tools to make relative machining work. CNC Turning is usually applied to machining shafts, plates, bushings and all other workpieces which have rotary surfaces, it is a very widely application in practical mechanical manufacturing.
CNC turning can be divided into rough turning and finish turning, rough turning is for the purpose of machining with big cutting depth and big feed rate, to improve the machining efficiency. However, the precision of rough turning can only be grade IT11, the surface finish can only be Ra 20-10um. On the contrary, semi-finish machining and finish machining usually can only apply high speed but small feeding rate and cutting depth. In this condition, the machining accuracy can be up to grade IT10-7, the roughness can be Ra10-0.6um.
CNC Turning Cnc Turning,Cnc Machining Parts,Die Casting,Aluminum Castings NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.blcastings.com
Application of Stainless Steel Sea Water Submersible Dewatering Pump
Suitable for offshore platform fire-fighting, thermal dissipation, seawater desalinization, seawater lifting, coastal square fountain, mariculture and attemperation as ground source heat pump in coastal area.
Medium Range of Stainless Steel Sea Water Submersible Dewatering Pump
1 All kinds of seawater, alkaline corrosive water, clean water, cold water, rainwater, gushing water of mining, drinking water, etc.
2 Normal Water temperature range: +5ºC--+35ºC
High Temperature: 120ºC
3 Solid content (mass ratio): ≤0.01%
4 PH value: 7.9-8.6
Motor Parameter of Stainless Steel Sea Water Submersible Dewatering Pump
The submersible motor is lubricated by clean water. It must be filled with clean water or its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Power Source of Stainless Steel Sea Water Submersible Dewatering Pump
Voltage: 380v~10kv ,Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.
Materials of Stainless Steel Sea Water Submersible Dewatering Pump
Impeller: SS316/316L
Pump bowl: SS316/316L
Pump shaft: stainless steel 316L. Filter :316L. Â Bolt:316 Â Flange:316
End bell (upper and lower): 316 Â Middle part:316 Â Motor shaft:316
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber
Advantages of Stainless Steel Sea Water Submersible Dewatering Pump
1 Easy installation
2 Low noise, multistage
3 Built-in checkvalve avioding water hammer impact.
4 High head with singlestage, strong stability,the shaft diameter φ50mm, improving the equipment's torsional property.
Bearing liner is made of natural rubber and more wear-resisting .
Supplys Scope of Stainless Steel Sea Water Submersible Dewatering Pump
Seawater submersible pump (including the body and motor), built-in checkvalve, 1 flange matching outlet,12 bolts 16×60
(8.8), 1 maintanence instruction, 1 conformity certificate,1 packing list, external packing.
 
Â