Warehouse Storage Folding Stacking Wire Mesh Cages
Pulse Solenoid Valve Pulse Solenoid Valve Pulse Solenoid Valve,Submerged Electromagnetic Pulse Valve,2 Inch Pulse Solenoid Valve,Rectangular Pulse Solenoid Valve Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.comWarehouse Storage Metal Folding Stacking Wire Mesh Cages
Our company can offer various types storage cage,Galvanized wire mesh container recommended for applications requiring maximum ruggedness and durability in a wide range of manufacturing and warehousing applications. The unique fold-down feature collapses this container to approximately 10 inches when not in use.
1. Product Instructions
1.Material: Low carbon steel
2.Surface treatment:Â electro galvanized, hot dipped galvanized
3.Loading capacity:1000-3000kg
4. Available in 5Â to 14mm galvanized welded mesh
5. Legs are wrapped and welded around the based-no edges to scratch floors or people
6. Double wire reinforcements at load-bearing surface and top edges
7. Base inside walls protect content from damage
8. Open wire mesh design allows for full visibility for inventory checks, ventilation and cleanliness
8.Adapts patented technology, with new pattern and unique design, Can also design and produce commercial storage equipment of various specifications according to customer's requirements
9. Offers overall arrangement for all kinds of markets and warehouses .
Â
Regular models of wire mesh container
Item No.
Specification
Wire diameter
Mesh gauge
Load capacity
Self-weight
Feet height
External size (L*W*H)(mm)
Internal size (L*W*H)(mm)
(mm)
(mm)
(kg)
(kg)±2%
(mm)
 A1-800
800*600*640
750*550*500
5.8
50*50
800
29
100
 A1-700
5.6
50*50
700
27.8
 A1-600
5.3
50*50
600
23
 A1-400
4.8
50*50
400
20.6
 A2-600
5.8
50*100
600
25
 A1-1000
6.3
50*50
1000
32
 B1-1200
1000*800*840
950*750*700
5.8
50*50
1200
44.8
100
 B1-1000
5.6
50*50
1000
42.8
 B1-800
5.3
50*50
800
35.2
 B1-600
4.8
50*50
600
30.8
 B2-1000
5.8
50*100
1000
39
 B1-1500
6.3
50*50
1500
51
 C1-1500
1200*1000*890
1150*950*750
5.8
50*50
1500
60.8
100
 C1-1300
5.6
50*50
1300
55.8
 C2-1000
5.8
50*100
1000
53.8
 C2-800
5.6
50*100
800
48.4
 C1-2000
6.3
50*50
2000
68
Remark: the size, wire diameter, mesh gauge can be customized as your design. 
Â
The pulse signal is input into the coil of the solenoid valve through the wire, and the pulse valve is controlled by the output signal of the pulse injection control instrument. The pressure change of the two gas chambers of the front and back of the valve can make the deformation of the rubber diaphragm open and close the pulse valve. The diameter of the rubber diaphragm determines the size of the rubber diaphragm and the speed of opening and closing. The larger the diameter of the diaphragm, the larger the stroke and the better the injection performance.
Definition:
The pulse solenoid valve is also called the diaphragm valve. It is the "switch" of the compressed air in the dust cleaning and blowing system of the pulse bag type Dust Collector. It is controlled by the output signal of the pulse injection control instrument, and blows the dust in the filter bag (room), so that the resistance of the dust collector is kept within the set range, so as to ensure the handling capacity and the dust collecting efficiency of the dust collector.
Working principle:
The coil of the solenoid valve is input into the forward pulse signal through the wire, and the working flux generated by the coil causes the moving core to pull in and open the valve. When the forward pulse signal is stopped, the moving core is released, the moving core is returned to the initial state under the effect of spring force, and the valve is also kept in the form of self holding, and it can be kept after the forward pulse or power break, and the negative pulse signal is needed to reset. The principle of the pulse solenoid valve is to use the pulse of the electrical apparatus. The impulse is transformed into a mechanical pulsation, which makes the strong energy of the pulsating gas become momentum, and produces a huge force in a short time. The interval of the pulse is controlled by PLC to be determined according to the recovery time of the rated gas pressure, L.
Use:
Usually installed in the main oil road or the shock absorber back pressure oil road, the oil pressure drops when the transmission is automatically raised and lowered, or when the lock stop and the lock stop are started, in order to reduce the shift and lock the unlocking impact and make the vehicle run more balanced.
Its function is to control the oil pressure in the oil road.
Effect:
It is to control the size of oil pressure in the oil road. It is usually installed in the main oil road or the back pressure oil road of the shock absorber to reduce the oil pressure shock when the shift and lock are unlocked, so that the operation of the equipment is kept stable.
According to the angle of valve inlet and outlet and the form of air inlet, it can be divided into three types.
1. right angle electromagnetic pulse valve: the diaphragm valve is directly controlled by electrical signals at the right angle of the inlet and outlet of the valve body.
2. straight through electromagnetic pulse valve: diaphragm valve is directly controlled by electrical signals at 180 degrees of inlet and outlet of valve body.
3. Submerged Electromagnetic Pulse Valve: diaphragm valve which is directly submerged by the valve inlet and is directly controlled by electrical signals.