Model NO.: DTI/500/1000/L40-M60
Trademark: X-ing
Transport Package: Wooden Case
Specification: 200*96*105 (cm)
Origin: China
HS Code: 8504231100
Model NO.: DTI/500/1000/L40-M60
Trademark: X-ing
Transport Package: Wooden Case
Specification: 200*96*105 (cm)
Origin: China
HS Code: 8504231100
Technical parameters:
model |
thrust |
speed |
push distance |
motor model |
700 |
500 |
L40/M60 |
40 |
AQ28036 |
Introduction:The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments.Â
Technical specification:
NO. |
Type |
Trust (kg) |
Route (mm) |
Speed (mm/s) |
Motor |
380(V) |
Le(mm) |
contour dimension (L*W*H)mm |
 (weight) (kg) |
Type |
Power (w) |
Revolution (T/Min) |
Electricity (A) |
LeMin |
LeMax |
1 |
25-20-I |
25 |
200 |
48 |
AO25024 |
40 |
1400 |
0.23 |
369 |
569 |
580*125*118 |
7.5 |
2 |
25-20-II |
25 |
200 |
96 |
AO25022 |
60 |
2800 |
0.23 |
369 |
569 |
580*125*118 |
7.5 |
3 |
100-40-I |
100 |
400 |
42 |
AO5624 |
120 |
1400 |
0.47 |
640 |
1040 |
858*152*206 |
23 |
4 |
100-40-II |
100 |
400 |
84 |
AO5622 |
180 |
2800 |
0.52 |
640 |
1040 |
858*152*206 |
23 |
5 |
300-50-I |
300 |
500 |
42 |
AO6334 |
370 |
1400 |
1.12 |
745 |
1245 |
998*170*226 |
35 |
6 |
300-50-II |
300 |
500 |
84 |
AO6332 |
550 |
2800 |
1.38 |
745 |
1245 |
998*170*226 |
35 |
7 |
500-50-I |
500 |
500 |
50 |
AO7134 |
750 |
1400 |
2.02 |
778 |
1278 |
1098*190*226.5 |
52 |
8 |
500-50-II |
500 |
500 |
100 |
AO7132 |
1100 |
2800 |
2.6 |
778 |
1278 |
1098*190*226.5 |
52 |
9 |
700-60-I |
700 |
600 |
50 |
AO7134 |
750 |
1400 |
2.02 |
803 |
1343 |
1193*200*279 |
63 |
10 |
700-60-II |
700 |
600 |
100 |
AO7132 |
1100 |
2800 |
2.6 |
803 |
1343 |
1193*200*279 |
63 |
11 |
1000-60-I |
1000 |
600 |
50 |
JO2-21-4 |
1100 |
1400 |
2.68 |
883 |
1483 |
1260*204*271 |
75 |
12 |
1000-60-II |
1000 |
600 |
100 |
JO2-21-2 |
1500 |
2860 |
3.24 |
883 |
1483 |
1260*204*271 |
75 |
13 |
1600-80-I |
1600 |
800 |
50 |
JO2-31-4 |
2200 |
1400 |
4.9 |
1063 |
1863 |
1535*302*330 |
 |
14 |
1600-80-II |
1600 |
800 |
100 |
JO2-31-2 |
3000 |
2860 |
8.06 |
1063 |
1863 |
1535*302*330 |
 |
Model# introduction:
Structure drawing:

OUR WORKSHOP
OUR SALES TEAM
Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!
Technical parameters:
model |
thrust |
speed |
push distance |
motor model |
700 |
500 |
L40/M60 |
40 |
AQ28036 |
Introduction:The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments.Â
Technical specification:
NO. |
Type |
Trust (kg) |
Route (mm) |
Speed (mm/s) |
Motor |
380(V) |
Le(mm) |
contour dimension (L*W*H)mm |
 (weight) (kg) |
Type |
Power (w) |
Revolution (T/Min) |
Electricity (A) |
LeMin |
LeMax |
1 |
25-20-I |
25 |
200 |
48 |
AO25024 |
40 |
1400 |
0.23 |
369 |
569 |
580*125*118 |
7.5 |
2 |
25-20-II |
25 |
200 |
96 |
AO25022 |
60 |
2800 |
0.23 |
369 |
569 |
580*125*118 |
7.5 |
3 |
100-40-I |
100 |
400 |
42 |
AO5624 |
120 |
1400 |
0.47 |
640 |
1040 |
858*152*206 |
23 |
4 |
100-40-II |
100 |
400 |
84 |
AO5622 |
180 |
2800 |
0.52 |
640 |
1040 |
858*152*206 |
23 |
5 |
300-50-I |
300 |
500 |
42 |
AO6334 |
370 |
1400 |
1.12 |
745 |
1245 |
998*170*226 |
35 |
6 |
300-50-II |
300 |
500 |
84 |
AO6332 |
550 |
2800 |
1.38 |
745 |
1245 |
998*170*226 |
35 |
7 |
500-50-I |
500 |
500 |
50 |
AO7134 |
750 |
1400 |
2.02 |
778 |
1278 |
1098*190*226.5 |
52 |
8 |
500-50-II |
500 |
500 |
100 |
AO7132 |
1100 |
2800 |
2.6 |
778 |
1278 |
1098*190*226.5 |
52 |
9 |
700-60-I |
700 |
600 |
50 |
AO7134 |
750 |
1400 |
2.02 |
803 |
1343 |
1193*200*279 |
63 |
10 |
700-60-II |
700 |
600 |
100 |
AO7132 |
1100 |
2800 |
2.6 |
803 |
1343 |
1193*200*279 |
63 |
11 |
1000-60-I |
1000 |
600 |
50 |
JO2-21-4 |
1100 |
1400 |
2.68 |
883 |
1483 |
1260*204*271 |
75 |
12 |
1000-60-II |
1000 |
600 |
100 |
JO2-21-2 |
1500 |
2860 |
3.24 |
883 |
1483 |
1260*204*271 |
75 |
13 |
1600-80-I |
1600 |
800 |
50 |
JO2-31-4 |
2200 |
1400 |
4.9 |
1063 |
1863 |
1535*302*330 |
 |
14 |
1600-80-II |
1600 |
800 |
100 |
JO2-31-2 |
3000 |
2860 |
8.06 |
1063 |
1863 |
1535*302*330 |
 |
Model# introduction:
Structure drawing:

OUR WORKSHOP
OUR SALES TEAM
Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!
The Water Meters are the
most popular used meters and have very long history of development. Water
meters are mainly measuring the total flow for the water consumption. From many
years of growing and development, from the very simple water meters,Residential Water Meter,Cold Water Meter, electronic
water meters, Mechanical Water Meters, Ultrasonic Water Meters, smart water
meters to the wireless water meters, people cares much more about the water
meters accuracy and energy saving. Our company concentrates on the development
of the mechanical water meters and ultrasonic water meters for many years.
Our mechanical water
meters are mainly with the accuracy class 3 and our ultrasonic water meters are
with the accuracy class 2. Now our company is still developing the water meters
with higher level accuracy. Comparing with the traditional simple water meters,
our water meters strengthen the advantages of water saving, higher accuracy,
easy installation and long lifetime use. Usually speaking, our water meters
have more than 5 years quality guarantee. Meanwhile, low cost maintenance is
also very good advantages of our water meters.
Water Meters
Water Meters,Ultrasonic Water Meters,Mechanical Water Meters,Smart Water Meters,Residential Water Meter,Cold Water Meter
Berggruen Technology Co.,Ltd , http://www.meter-technology.com