Model NO.: ACE-FJG-2L8
Main Material: SUS304/SUS316L/ Red Copp
Processing: Fermenting Equipment
Inner Wall Treating: Mirror Polish
Legs: Adjustable
Top Sharp: Domed
Capacity: 30L-3000L
Insulation: Pollyurethane Foam
Surface Finish: 2b Cold-Rolled, Annealed, Pic
Type: Vertical,Tapered Cylindrical
Bottom Sharp: 60 ° Conical
Trademark: ACE
Transport Package: Soft Clothed or Wooden Box
Specification: CE, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8438400000
Model NO.: ACE-FJG-2L8
Main Material: SUS304/SUS316L/ Red Copp
Processing: Fermenting Equipment
Inner Wall Treating: Mirror Polish
Legs: Adjustable
Top Sharp: Domed
Capacity: 30L-3000L
Insulation: Pollyurethane Foam
Surface Finish: 2b Cold-Rolled, Annealed, Pic
Type: Vertical,Tapered Cylindrical
Bottom Sharp: 60 ° Conical
Trademark: ACE
Transport Package: Soft Clothed or Wooden Box
Specification: CE, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8438400000
Â
Beer Equipment/Craft Beer Fermentation Tank (ACE-FJG-2L8)
Technical Characteristics:
Â
All AISI-304(316L) Stainless Steel Construction
Jacketed & Insulated
Dual Zone Dimple Cooling Jacket
Dish Top & 60° Conical Bottom
4 Stainless Steel Legs with Leveling PortsÂ
Fermenters are also called CCT's (Cylindrical Conical Tanks),FV's (Fermentation Vessel), primary fermentor or unitanks.as they are used both for fermenting and maturation.
Fermenting is the process during which the yeast transforms the wort into beer.Â
Maturation takes place after fermenting and is the time given to the beer to stabilize and age after fermenting.Fermenters can be individually temperature controlled through glycol jackets .The design of fermenters is based on our vast beer knowledgeand especially the conical fermenter bottom.We combine fermentation and maturation in the same vessel s very important.When calculating your fermenting and storage capacity and configuration sufficient time for fermenting and storage to produce quality beers must be taken into consideration.
 
Fermentation tank:
1. 60 or 72 degree cone bottom to drip the yeast.
2. 3-sections cooling jackets. There are two sections on the cylinder and one section onÂ
the conical bottom.
3.Thd cooling medium is glycol.
4. inner thickness is 3.0mm,the outer thickness is 2.0mm,the external jacket is 1.5mm.
5.The jacket design pressure is 0.3mpa,the working pressure is 0.12-0.15mpa
6.dished head,breathing valve,cleaning ball,L pipeline,pressure gauge,machanical safety valve,Â
  thermomer, sample valve, temperature sensor, butterfly valve,pipelines, pipe surport
Each Fermenter Includes:

Â
Top Manway or Side Shadow less Manway
Racking Port with Tri-Clover Butterfly Valve
Discharge Port with Tri-Clover Butterfly Valve
2 Tri-Clover Outlets with Butterfly Valves
CIP Arm and Spray Ball
Sample Valve
Pressure Gauge
Safety Valve
Thermowell with Tank Thermometer
Â
  
Whether your in need of additional Fermenters or Bright Tanks for your existing brewery, or need an entire Brewhouse we have you covered. We can have any tank custom built to your specific size and style requirements. Copper Cladding is available on any fermenter, bright tank, mash tun/ brew kettle, lauter tun/ whirlpool etc.

Â
- Effective volume:200L-10000L
- Inner container: SUS304,Thickness 3mm, 2B finished.
- Outer container: SUS304, thickness 2mm, Grind arenaceous.
- Shell jacket: SUS304, thickness 1.5mm.
- Insulation Material: polyurethane, thickness: 80mm.
- Ribbon polished for the welded place.Â
- Conical top/ Cylinder/ conical bottom/ shell jacket(one or two sections) / bottom jacket / insulation both on shell and bottom / with adjustable legs.
- Connections:level interface/ steam Import and Export/ Pt100 interface/ top manhole / respirator/ Inlet/ Outlet.

Â
Â
Model & Specification |
100L |
200L |
500L |
1000L |
2000L |
5000L |
10000L |
20000L |
50000L |
Diameter(mm) |
400 |
500 |
700 |
900 |
1200 |
1500 |
1800 |
2300 |
3100 |
Height(mm) |
2000 |
2300 |
2650 |
2900 |
3800 |
4480 |
5250 |
6550 |
8550 |
Pressure inside tank (Mpa) |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
Pressure inside jacket (Mpa) |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
pipe0.3 |
pipe0.3 |
pipe0.3 |
Impeller number |
2 |
2 |
2 |
2 |
2 |
3 |
3 |
4 |
4 |
Mixing speed (r/min) |
400 |
360 |
265 |
220 |
180 |
160 |
145 |
125 |
110 |
Rotor power (r/min) |
0.55 |
0.75 |
1.5 |
2.2 |
4 |
7.5 |
17 |
30 |
55 |
Cooling type |
jacket |
tube |

Wenzhou Ace Machinery Co., LTD supply Mixing tanks ,Reactor tank, fermentation tank, Inline homogenizer, High shear emulsifier mixer, ,Jacket cooking kettle, milk cooling tank sanitary fittings,etc.
Widely used in many fields, such as dairy, beer, food, pharmacy, beverage, cosmetic etc.,exported to America, Europe, the Middle East.Â
Fermenter available from 1 Barrel to 100 Barrels with an average 25% Head Space. All tank have a
Dish top , Cylinder body & 60 /70° Cone Bottom . Certified stainless steel material for all tanks.
with 100% TIG welded joints and seams with sanitary interior polish. Dimple Plate jacket for
Glycol cooling & high efficient Polyurethane foam insulated. Â All tanks use Tri-clamp connections,
are designed for up to 14.7 PSI and tested at 30 PSI. Â We can custom fabricate any tank to meet
your brewery's space and height restrictions.
Â
Â
Beer Equipment/Craft Beer Fermentation Tank (ACE-FJG-2L8)
Technical Characteristics:
Â
All AISI-304(316L) Stainless Steel Construction
Jacketed & Insulated
Dual Zone Dimple Cooling Jacket
Dish Top & 60° Conical Bottom
4 Stainless Steel Legs with Leveling PortsÂ
Fermenters are also called CCT's (Cylindrical Conical Tanks),FV's (Fermentation Vessel), primary fermentor or unitanks.as they are used both for fermenting and maturation.
Fermenting is the process during which the yeast transforms the wort into beer.Â
Maturation takes place after fermenting and is the time given to the beer to stabilize and age after fermenting.Fermenters can be individually temperature controlled through glycol jackets .The design of fermenters is based on our vast beer knowledgeand especially the conical fermenter bottom.We combine fermentation and maturation in the same vessel s very important.When calculating your fermenting and storage capacity and configuration sufficient time for fermenting and storage to produce quality beers must be taken into consideration.
 
Fermentation tank:
1. 60 or 72 degree cone bottom to drip the yeast.
2. 3-sections cooling jackets. There are two sections on the cylinder and one section onÂ
the conical bottom.
3.Thd cooling medium is glycol.
4. inner thickness is 3.0mm,the outer thickness is 2.0mm,the external jacket is 1.5mm.
5.The jacket design pressure is 0.3mpa,the working pressure is 0.12-0.15mpa
6.dished head,breathing valve,cleaning ball,L pipeline,pressure gauge,machanical safety valve,Â
  thermomer, sample valve, temperature sensor, butterfly valve,pipelines, pipe surport
Each Fermenter Includes:

Â
Top Manway or Side Shadow less Manway
Racking Port with Tri-Clover Butterfly Valve
Discharge Port with Tri-Clover Butterfly Valve
2 Tri-Clover Outlets with Butterfly Valves
CIP Arm and Spray Ball
Sample Valve
Pressure Gauge
Safety Valve
Thermowell with Tank Thermometer
Â
  
Whether your in need of additional Fermenters or Bright Tanks for your existing brewery, or need an entire Brewhouse we have you covered. We can have any tank custom built to your specific size and style requirements. Copper Cladding is available on any fermenter, bright tank, mash tun/ brew kettle, lauter tun/ whirlpool etc.

Â
- Effective volume:200L-10000L
- Inner container: SUS304,Thickness 3mm, 2B finished.
- Outer container: SUS304, thickness 2mm, Grind arenaceous.
- Shell jacket: SUS304, thickness 1.5mm.
- Insulation Material: polyurethane, thickness: 80mm.
- Ribbon polished for the welded place.Â
- Conical top/ Cylinder/ conical bottom/ shell jacket(one or two sections) / bottom jacket / insulation both on shell and bottom / with adjustable legs.
- Connections:level interface/ steam Import and Export/ Pt100 interface/ top manhole / respirator/ Inlet/ Outlet.

Â
Â
Model & Specification |
100L |
200L |
500L |
1000L |
2000L |
5000L |
10000L |
20000L |
50000L |
Diameter(mm) |
400 |
500 |
700 |
900 |
1200 |
1500 |
1800 |
2300 |
3100 |
Height(mm) |
2000 |
2300 |
2650 |
2900 |
3800 |
4480 |
5250 |
6550 |
8550 |
Pressure inside tank (Mpa) |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
Pressure inside jacket (Mpa) |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
pipe0.3 |
pipe0.3 |
pipe0.3 |
Impeller number |
2 |
2 |
2 |
2 |
2 |
3 |
3 |
4 |
4 |
Mixing speed (r/min) |
400 |
360 |
265 |
220 |
180 |
160 |
145 |
125 |
110 |
Rotor power (r/min) |
0.55 |
0.75 |
1.5 |
2.2 |
4 |
7.5 |
17 |
30 |
55 |
Cooling type |
jacket |
tube |

Wenzhou Ace Machinery Co., LTD supply Mixing tanks ,Reactor tank, fermentation tank, Inline homogenizer, High shear emulsifier mixer, ,Jacket cooking kettle, milk cooling tank sanitary fittings,etc.
Widely used in many fields, such as dairy, beer, food, pharmacy, beverage, cosmetic etc.,exported to America, Europe, the Middle East.Â
Fermenter available from 1 Barrel to 100 Barrels with an average 25% Head Space. All tank have a
Dish top , Cylinder body & 60 /70° Cone Bottom . Certified stainless steel material for all tanks.
with 100% TIG welded joints and seams with sanitary interior polish. Dimple Plate jacket for
Glycol cooling & high efficient Polyurethane foam insulated. Â All tanks use Tri-clamp connections,
are designed for up to 14.7 PSI and tested at 30 PSI. Â We can custom fabricate any tank to meet
your brewery's space and height restrictions.
Â
Egg Crate Grille is a very economical solution to many lighting and luminous ceiling applications. These louvers are molded in polystyrene. The white panels are translucent and provide uniform illumination throughout the entire surface. Open cell design allows the light to be transmitted to the working area while reducing glare; in addition, this louver allows nearly unobstructed air movement which will increase the bulb and ballast longevity through more efficient heat dissipation. The louver is approved by UL for use under sprinkler systems and lighting ceiling applications.
Plastic Egg Crate Grille Speciafication:
Lattice Size 12.7mm*12.7mm*12.7mm( 1/2" x 1/2" x 1/2" )
Panle Size: 1.2*0.6m ( 48" x 24" )
Material: Plastic or Polystyrene
Color: White, black
Packing: 10 pcs in a carton or as your request.

Egg Crate Grille
Egg Crate Grille,Return Air Grille,Air Diffuser,Egg Crate Return Grille
Hebei Long Zhuo Trade Co., Ltd. , http://www.hblongzhuo.com