Fupeng Carbon Tetrachloride Treatment Plan Approved

Drying equipment

China Drying Network Recently, the General Office of the Ministry of Environmental Protection replied to Sichuan Leshan Fupeng Chemical Materials Co., Ltd. and agreed to apply for approval of a new 200,000-ton/year methane chloride plant by-product carbon tetrachloride disposal plan.

The reply requires Fupeng Chemical to strictly comply with the requirements. All the carbon tetrachloride by-products of the newly-built methane chloride plant must be converted through the plant-supported tetrachloroethylene production plant, and shall not be sold or arbitrarily discharged. The project shall not construct tetrachlorosilane. Carbon rectification plant. At the same time, an on-line monitoring device for carbon tetrachloride production shall be installed, data on production and conversion of carbon tetrachloride shall be submitted on time, and various solid wastes and hazardous wastes generated in the production process shall be properly disposed of, and acceptance and cooperation with supervision and inspection by relevant departments shall be accepted.

Compression Fittings

High pressure carbon steel with zinc trivalent anti-corrosion coating per J514 standard. Flareless compression tube fittings come fully assembled with tube Nuts and ferrules. These fittings are used with hydraulic tubing that cannot or does not need to be flared. Product Details Flareless Compression Tube Fittings The male fitting has straight threads and a 24° seat. The female connection uses a tube, tube nut, and bite-type sleeve. When the tube nut is tightened the seal is made between the sleeve and 24° seat. A seal is also made between the sleeve and the tubing. The threads hold the connection mechanically.

Compression Fittings,Tube Fittings,Branch Elbows,Branch Union Elbows

Jiaxing Master Fitting CO.,LTD , https://www.jiaxingmaster.com