Split electromagnetic flow maintenance method
Knotting Machine For Warp Knitting Knotting machine for warp knitting is a device used to join broken warp ends during the warp knitting process. It is an essential tool for warp knitting machines that run continuously for long periods of time, as broken warp ends can cause production downtime and affect the quality of the final product.
Overall, a knotting machine for warp knitting is an essential tool for any textile manufacturer using a warp knitting machine. It helps to ensure continuous production and high-quality finished products.
Knotting Machine For Warp Knitting,Knotting Machine With Leasing,Knotting Machine Without Leasing,Knotting Machine With Double Knot suzhou cotex international Co.,Ltd , https://www.cotexmill.com
Split-type electromagnetic flowmeter should be how to maintain, there is split-type electromagnetic flowmeter failure how to overhaul?
1) Always observe the sensor power cable and transmission cable (or wire) for damage and aging, and protect the rubber sheath outside the cable.
2) Regularly (usually six months) scrub the surface of the electrode with a soft cloth to remove dirt or deposits.
3) Remove debris from the upstream straight section of the sensor.
Split magnetic flowmeter troubleshooting:
1) The liquid does not flow and has output: 1. The signal transmission cable is connected to the converter and disconnected; 2. The signal cable is disconnected from the electrode connection; 3. The electrode surface is contaminated or an insulating layer is deposited; 4. The grounding is poor or the circuit is broken.
Solution: 1. Connect the cable; 2. Open the sensor and reconnect it; 3. Scrub the electrode surface; 4. Connect the ground wire.
2) No liquid output flow: 1. The signal transmission cable between the converter and the two core wires is reversed; 2. The power supply is not connected or has poor contact; 3. The sensor instrument pipeline, casing, and end face are leaky.
Solution: 1. Reverse the head; 2. Connect the power supply and maintain good contact; 3. Repair the sensor.
3) The output is not stable: 1. The flow field is unstable; 2. The gas contained in the sensor contains large solid blocks; 3. The virtual connection of the electrical connection; 4. The grounding is bad; 5. The electrode leakage solution: 1. Renovation Pipeline, or increase the installation of false sensors; 2. Normal phenomenon; 3. Check the wiring, connect the wire; 4. Connect the ground wire; 5. Repair the sensor.
4) The error is too large: 1. The zero point is too high; 2. It is not completely filled with liquid; 3. The distortion of the power supply is too large; 4. The grounding is poor.
Solution: 1. Re-adjust the zero point; 2. Improve the pipeline conditions, the sensor is always full of liquid; 3. Improve the power supply conditions, in line with normal working conditions; 4. Connect the ground wire
The knotting machine works by detecting a broken warp end and automatically tying a knot to connect the broken ends. The machine uses a series of sensors to detect the broken end and then feeds the ends through a knotting mechanism that ties a secure knot. The machine can also trim the excess thread to ensure a neat and tidy finish.
Knotting machines for warp knitting come in various sizes and configurations depending on the type of Warp Knitting Machine being used. They are typically made from high-quality materials to ensure durability and reliability.
