New Zhanjiang high-aluminum ceramic tile is the best material to replace silicon bricks Gongyi Hongfa Minerals Co., Ltd.
High aluminum tiles are the best material to replace silica bricks A neutral refractory material with an alumina content of more than 48%. By bauxite or other high alumina content of raw materials formed and calcined. High thermal stability, refractoriness above 1770°C. Good slag resistance. Used for masonry lining of steelmaking furnaces, glass furnaces, cement rotary furnaces, etc.
Poly(acrylic acid) (PAA; trade name Carbomer or Carbopol) is a polymer with the formula (CH2-CHCO2H)n. It is a derivative of acrylic acid (CH2=CHCO2H). In addition to the homopolymers, a variety of copolymers and crosslinked polymers, and partially deprotonated derivatives thereof are known and of commercial value. In a water solution at neutral pH, Carbopol 940 is an anionic polymer, i.e., many of the side chains of PAA lose their protons and acquire a negative charge. Partially or wholly deprotonated PAAs are polyelectrolytes, with the ability to absorb and retain water and swell to many times their original volume. These Sodium Hexametaphosphate properties - acid-base and water-attracting - are the bases of many applications.
Carbomer940 Carbopol is a polyolefin. It can be viewed as polyethylene Titanium Dioxide with carboxylic acid (CO2H) substituents on alternating carbons. Owing to these groups, alternating carbon atoms in the backbone are stereogenic (colloquially: chiral). For this reason, Carbopol 340 Tinci Carbomer exists in atactic, syndiotactic, and isotactic forms, although Carbopol 940 Price this aspect is rarely discussed. The polymerization is initiated with radicals and Carbopol Powder is assumed to be stereorandom. Crosslinking can be introduced in many ways.
Mainly used for masonry blast furnace, hot air furnace, electric furnace top, blast furnace, reverberatory furnace, rotary kiln lining. In addition, high-alumina bricks are widely used as refrigerated lattice bricks for open hearth furnaces, plug heads for gating systems, and nozzle bricks. However, the price of high-aluminum tiles is higher than that of clay bricks, so high-aluminum tiles need not be used where clay bricks can meet the requirements.
Silica bricks have a silicon dioxide content of over 93%. The true density is 2.38g/cm3. With anti-acid slag erosion performance. High temperature strength. Load softening starting temperature 1620 ~ 1670 °C. Long-term use without deformation at high temperatures. More than 600 °C generally no crystal transformation. Smaller temperature expansion coefficient. High thermal shock resistance. Crystal transformation below 600°C is more, volume change is larger, and thermal shock resistance is worse. The natural silica is used as raw material and an appropriate amount of mineralizing agent is added to promote the conversion of quartz in the green body to phosphorus quartz. It was slowly fired at 1350 to 1430°C under a reducing atmosphere.
Mainly used for coke oven and combustion chamber partitions, steel regenerator regenerators and slag chambers, soaking furnaces, glass melting furnaces, refractories, ceramic kiln furnaces, etc. Bearing location. It is also used for hot blast furnace high-temperature load-bearing parts and acid open hearth roofs.
As for whether high aluminum tiles can replace silicon bricks, the key is to use some of the process parameters. Because of the stringent requirements for temperature rise of silicon bricks, the temperature rise is slow, especially when the temperature is within 300 degrees, and the resistance to quenching and rapid thermal performance is poor. The advantages are high temperature resistance and alkali resistance. High-alumina bricks will shrink at high temperatures and heat preservation, and attention should be paid to large-span parts. In an alkaline atmosphere, it is easy to peel off, especially bricks containing aluminum.
High aluminum content, high operating temperature.
If the maximum operating temperature is up to 1400°C, it is not a long-term use and occasional ceasefire or cooling is required. The use of high-aluminum ceramic tiles instead of silica bricks is certainly better than silica bricks.
Company Name: Gongyi Hongfa Minerals Co., Ltd Tel: +86-0371-85610369
Fax: +86-0371-85610369
Cell phone
High aluminum tile mailbox: [email protected]
Business QQ:5595115
Address: Hetaoyuan Development Zone, Gongyi City, Henan, China
Carbopol 940,Carbomer940 Carbopol,Carbopol 340 Tinci Carbomer,Carbopol 940 Price,Carbopol Powder
HENAN LIHAO CHEM PLANT LIMITED , https://www.lihaoche.com