Beads Forming Machine Damper Shell Molding Forming Machine

1,Equipment structure

It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.

2, Technical parameter of equipment main parts

2.1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
C,Outer diameter≤ 1200mm
 

2.2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment

2.3Feeding

Power 0.37kw

2, 4Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine


2.5 Cutting machine
Flying saw cutting without bur
Motor power: 2.2KW
Quantity of cutting blades: 1sets Cutting type:Flying saw cutting without bur
 

3.The operator can do the following

 3.1The setting program (PLC)

Monitoring the control process,

Modify the control parameters,

The length of the workpiece digital setting,

The length of the workpiece adjusting.

Running state real-time monitoring equipment and fault indication.

3.2 Mode of operation
manual / auto two. With manual, automatic switching function: in the manual mode, can be stand-alone operation, convenient repair; in the automatic mode, all production and operation, the start up sequence; along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel

4.Main Machine Technical parameter

1,Equipment structure

It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.

2, Technical parameter of equipment main parts

2.1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
C,Outer diameter≤ 1200mm
 

2.2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment

2.3Feeding

Power 0.37kw

2, 4Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine


2.5 Cutting machine
Flying saw cutting without bur
Motor power: 2.2KW
Quantity of cutting blades: 1sets Cutting type:Flying saw cutting without bur
 

3.The operator can do the following

 3.1The setting program (PLC)

Monitoring the control process,

Modify the control parameters,

The length of the workpiece digital setting,

The length of the workpiece adjusting.

Running state real-time monitoring equipment and fault indication.

3.2 Mode of operation
manual / auto two. With manual, automatic switching function: in the manual mode, can be stand-alone operation, convenient repair; in the automatic mode, all production and operation, the start up sequence; along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel

4.Main Machine Technical parameter