Model NO.: RR135
Power: 135kw
Cutting Chamber(L*W): 740*1200mm
Output Size: 10-30mm Rubber Mulch
Motor: Siemens
Hopper Opening: 1410*910*1410mm
Mulch′s Uses: Landscaping, Plant Mulch, etc.
Rasper Weight: 13500kg
Capacity: 1.5-3ton/H
Tire Recycling Machine′s HS Code: 8474100000
Trademark: Shredwell
Transport Package: Rasper Packed with Film and Wooden Case
Specification: 2010*2560*4110mm
Origin: Wuxi, China
HS Code: 8474100000
Model NO.: RR135
Power: 135kw
Cutting Chamber(L*W): 740*1200mm
Output Size: 10-30mm Rubber Mulch
Motor: Siemens
Hopper Opening: 1410*910*1410mm
Mulch′s Uses: Landscaping, Plant Mulch, etc.
Rasper Weight: 13500kg
Capacity: 1.5-3ton/H
Tire Recycling Machine′s HS Code: 8474100000
Trademark: Shredwell
Transport Package: Rasper Packed with Film and Wooden Case
Specification: 2010*2560*4110mm
Origin: Wuxi, China
HS Code: 8474100000
Waste/Scrap/Used Tire Recycling Machine Producing 10-20mm Wire-Free rubber Mulch
Function: To further reduce the 50-150mm chips from primary shredder to 10-20mm wire-free mulch.Â
More Details
Shredwell RR series tyre Rasper is specially designed to take wire out of pre-shredded tire chips and produce wire free rubber chips between 10-20mm. It is the secondary cutting in whole tire recycling process.
Â
Our patented design allows it to remove the wire from rubber tires in the purest, cleanest form possible, allowing processors to generate revenue from both rubber and wire.
End Product and Some of its Uses
Table 1
End Product of Tire Recycling Machine and Some of its Uses
| Sizes |
50-150mm Chip Rubber |
10-20mm Ground Rubber |
1-5mm Crumb Rubber |
30-120mesh Powder Rubber |
| Applications |
Tire Derived Fuel |
Loose-fill playground |
Paving |
Tire Derived Products |
| Tire Derived Aggregates |
Landscape mulch |
Turf infill |
Asphalt addictive |
| Tire Derived Products |
Equestrian material |
Tire Derived Products |
 |
| Alternative Daily Cover |
Tire Derived Fuel |
 |
 |
| Â |
Tire Derived Products |
 |
 |
Â
Table 2
Implications for the Terminology in Table 1
| Tire Derived Fuel |
To increase burning value at cement kilns |
| Tire Derived Aggregates |
As lightweight landfill to replace conventional congregates like rock
To mitigate vibration in light rail systems
Other civil engineering projects |
| Alternative Daily Cover |
Used at landfills instead of soil to control vectors, fires, odors, blowing litter, and scavenging. |
| Paving |
Sports track
Gym flooring
etc |
Main Features
*The rotor is manufactured and designed for minimum wear;
*Easily exchangeable blades and screens enable the possibility to maintain the machine efficiently;
*Screens with different hole sizes available for flexible production;
*The internal wear surfaces are lined with replaceable wear liners that are easily changed when worn.This exclusive feature of rasper eliminates the need for any maintenance welding and results in greater machine uptime.
Tire Rasper (Tire Recycling Machine) Specification
Â
| Rasper |
RR315 |
RR135 |
RR90 |
RR75 |
| Motor |
Siemens |
Siemens |
Siemens |
Siemens |
| Power |
315kw |
135kw |
90kw |
75kw |
| Voltage |
as per request |
as per request |
 as per request |
as per request |
| Cutting chamber(L*W) |
700*1560mm |
740*1200mm |
550*1000mm |
550*800mm |
| Equipment dimension |
6220*2170*3560mm |
2010*2560*4110mm |
2090*2180*4100mm |
1990*1980*4100mm |
| Weight |
24000kg |
13500kg |
9200kg |
8500kg |
| Hopper opening |
1730*880*910mm |
1410*910*1410mm |
1190*710*1250mm |
980*700*1260mm |
| Capacity |
3-6t/h |
1.5-3t/h |
1-1.5t/h |
0.7-1t/h |
| Final product |
10-30mm |
10-30mm |
10-30mm |
10-30mm |
Proposal &Â Quotation
Please tell us your requirements for us to send you the most suitable offer.
1. What're the sizes of your tyres?
2. What's your goal output sizes? For what purpose do you want end-product from the recycling machine?
3. How many tons per hour do you need waste tire recycling machine to process?
FAQ about Shredwell
1)  Are you a factory or trade company?
We are professional recycling shredder factory with the modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.Export proportion around 50%. .
2) How can IÂ trust your company?
a. Modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
b. Famous brand component as our standard configuration, like Siemens Motor, Tongli or SEW reducer, Siemens PLC and Schneider component. All parts processing by CNC machining to warranty the precision.
c. Assessed by third party-national test centre. national patents for all equipment, also CE, ISO.
d. Welcome to inspect anytime. We are near to Shanghai airport.
e. About the machine, we do much better on:Wear plates, seals, structure design, pressure head.
3) How about the test running &Â installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping out used tire shredding line, we will invite you to come to test your machines, when you are satisfied; we start to pack and delivery.
We will send our enginner team(At least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, and commission as well as training your workers.
4) Your warranty?
Under the proper usage, 1-3 year for whole machine.
5)Â Â Is your price competitive?
Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.Â
Some shredders are less expensive than ours, but to get a true expense picture you need to consider total cost, which includes the plants' longevity as well as your lost production if they malfunction.
Packing and delivery
1. A layer of plastic wraps to protect single, double-shaft shredders and assisting machinery from dust, moisture and corrosion.
2. Wooden case is used as the outside package. Or according to the customer requirements.
3. Excellant logistic team to guarantee the shredder machines to be safely shipped to customer warehouse, no extra fee on export or import on custom.
Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery. Our equipment is based on self-owned intellectual property and has advanced European and American technology.
Â
Shredwell has now been in the shredding and recycling industry for more than 10years. Our engineering team has around 15 years experience in designing and manufacturing tire recycling machine line.Â
Â
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers. Our main focus is to provide our customers cost-effective tire recycling systems ranging from TDS system(50-100mm output chips), TSM system(20mm output wire free chips), TSC system (1-5mm rubber crumb), TSP system(30-120mesh rubber powder).
Â
Waste/Scrap/Used Tire Recycling Machine Producing 10-20mm Wire-Free rubber Mulch
Function: To further reduce the 50-150mm chips from primary shredder to 10-20mm wire-free mulch.Â
More Details
Shredwell RR series tyre Rasper is specially designed to take wire out of pre-shredded tire chips and produce wire free rubber chips between 10-20mm. It is the secondary cutting in whole tire recycling process.
Â
Our patented design allows it to remove the wire from rubber tires in the purest, cleanest form possible, allowing processors to generate revenue from both rubber and wire.
End Product and Some of its Uses
Table 1
End Product of Tire Recycling Machine and Some of its Uses
| Sizes |
50-150mm Chip Rubber |
10-20mm Ground Rubber |
1-5mm Crumb Rubber |
30-120mesh Powder Rubber |
| Applications |
Tire Derived Fuel |
Loose-fill playground |
Paving |
Tire Derived Products |
| Tire Derived Aggregates |
Landscape mulch |
Turf infill |
Asphalt addictive |
| Tire Derived Products |
Equestrian material |
Tire Derived Products |
 |
| Alternative Daily Cover |
Tire Derived Fuel |
 |
 |
| Â |
Tire Derived Products |
 |
 |
Â
Table 2
Implications for the Terminology in Table 1
| Tire Derived Fuel |
To increase burning value at cement kilns |
| Tire Derived Aggregates |
As lightweight landfill to replace conventional congregates like rock
To mitigate vibration in light rail systems
Other civil engineering projects |
| Alternative Daily Cover |
Used at landfills instead of soil to control vectors, fires, odors, blowing litter, and scavenging. |
| Paving |
Sports track
Gym flooring
etc |
Main Features
*The rotor is manufactured and designed for minimum wear;
*Easily exchangeable blades and screens enable the possibility to maintain the machine efficiently;
*Screens with different hole sizes available for flexible production;
*The internal wear surfaces are lined with replaceable wear liners that are easily changed when worn.This exclusive feature of rasper eliminates the need for any maintenance welding and results in greater machine uptime.
Tire Rasper (Tire Recycling Machine) Specification
Â
| Rasper |
RR315 |
RR135 |
RR90 |
RR75 |
| Motor |
Siemens |
Siemens |
Siemens |
Siemens |
| Power |
315kw |
135kw |
90kw |
75kw |
| Voltage |
as per request |
as per request |
 as per request |
as per request |
| Cutting chamber(L*W) |
700*1560mm |
740*1200mm |
550*1000mm |
550*800mm |
| Equipment dimension |
6220*2170*3560mm |
2010*2560*4110mm |
2090*2180*4100mm |
1990*1980*4100mm |
| Weight |
24000kg |
13500kg |
9200kg |
8500kg |
| Hopper opening |
1730*880*910mm |
1410*910*1410mm |
1190*710*1250mm |
980*700*1260mm |
| Capacity |
3-6t/h |
1.5-3t/h |
1-1.5t/h |
0.7-1t/h |
| Final product |
10-30mm |
10-30mm |
10-30mm |
10-30mm |
Proposal &Â Quotation
Please tell us your requirements for us to send you the most suitable offer.
1. What're the sizes of your tyres?
2. What's your goal output sizes? For what purpose do you want end-product from the recycling machine?
3. How many tons per hour do you need waste tire recycling machine to process?
FAQ about Shredwell
1)  Are you a factory or trade company?
We are professional recycling shredder factory with the modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.Export proportion around 50%. .
2) How can IÂ trust your company?
a. Modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
b. Famous brand component as our standard configuration, like Siemens Motor, Tongli or SEW reducer, Siemens PLC and Schneider component. All parts processing by CNC machining to warranty the precision.
c. Assessed by third party-national test centre. national patents for all equipment, also CE, ISO.
d. Welcome to inspect anytime. We are near to Shanghai airport.
e. About the machine, we do much better on:Wear plates, seals, structure design, pressure head.
3) How about the test running &Â installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping out used tire shredding line, we will invite you to come to test your machines, when you are satisfied; we start to pack and delivery.
We will send our enginner team(At least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, and commission as well as training your workers.
4) Your warranty?
Under the proper usage, 1-3 year for whole machine.
5)Â Â Is your price competitive?
Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.Â
Some shredders are less expensive than ours, but to get a true expense picture you need to consider total cost, which includes the plants' longevity as well as your lost production if they malfunction.
Packing and delivery
1. A layer of plastic wraps to protect single, double-shaft shredders and assisting machinery from dust, moisture and corrosion.
2. Wooden case is used as the outside package. Or according to the customer requirements.
3. Excellant logistic team to guarantee the shredder machines to be safely shipped to customer warehouse, no extra fee on export or import on custom.
Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery. Our equipment is based on self-owned intellectual property and has advanced European and American technology.
Â
Shredwell has now been in the shredding and recycling industry for more than 10years. Our engineering team has around 15 years experience in designing and manufacturing tire recycling machine line.Â
Â
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers. Our main focus is to provide our customers cost-effective tire recycling systems ranging from TDS system(50-100mm output chips), TSM system(20mm output wire free chips), TSC system (1-5mm rubber crumb), TSP system(30-120mesh rubber powder).
Â
Motorcycle Brake Pads
Rear Brake Pads,Front Brake Pads,Brake Discs And Pads,Motorcycle Brake Pads
Wenzhou Tuxing Automobile and Motorcycle Parts Co., Ltd. , https://www.tuxingbrakes.com