Larson Electronics Introduces Permanent Installation of LED Deck Lights

January 20, 2024

A few days ago, industrial lighting expert Larson Electronics announced the launch of a 30-watt LED deck light that can be permanently mounted, fully rotated, and equipped with a 360° rotating shaft.
Larson Electronics Introduces Permanent Installation of LED Deck Lights
It is reported that Larson's DL-APB-LED 30-watt permanent installation LED deck light will provide high-power lighting solutions for operators who believe that low-voltage lamps are better. The 30-watt PAR46 LED emitter of this deck light has very high shock and vibration resistance and more than 80% efficiency over incandescent lamps. The average life of this LED lamp is 50,000 hours, and the 12 volt DC electrical system requires only 2.5 amps of current. With a strong light output of 2,700 lumens, a spot beam configuration of this lamp will produce a beam that is 600 inches long and 100 inches wide.
This deck light is permanently mounted to a surface with a shaft that helps the lamp rotate 360°. Located above the shaft mount is a joint that helps the operator adjust the light up and down. A chrome-plated knob is located on the back of the lamp to adjust the vertical tilt of the lamp. This LED LED deck light can be permanently mounted on any flat surface with 4 small screws and a rubber pad.

Cobalt Alloy Powder

Cobalt-based alloy powders are commonly used in laser cladding processes due to their excellent wear resistance, high temperature strength, and corrosion resistance. These alloys typically contain varying amounts of cobalt, chromium, tungsten, and nickel, among other elements, to achieve specific properties.

The laser cladding process involves melting the cobalt-based alloy powder using a high-energy laser beam and depositing it onto a substrate to form a protective coating. This coating helps to enhance the surface properties of the substrate, such as hardness, wear resistance, and corrosion resistance.

Some common cobalt-based alloy powders used in laser cladding include:

1. Stellite: This is a well-known cobalt-chromium-tungsten alloy that offers excellent wear and corrosion resistance. It is often used in applications where high temperatures and abrasive environments are present, such as in oil and gas drilling tools, valves, and pump components.

2. Tribaloy: Tribaloy alloys are cobalt-based alloys that contain varying amounts of chromium, molybdenum, and silicon. They are known for their exceptional high-temperature strength and resistance to galling, making them suitable for applications in the aerospace, petrochemical, and power generation industries.

3. Haynes alloys: Haynes alloys are nickel-cobalt-chromium-molybdenum alloys that offer excellent high-temperature strength, oxidation resistance, and corrosion resistance. They are commonly used in applications where extreme heat and corrosive environments are present, such as in gas turbines and chemical processing equipment.

These cobalt-based alloy powders are available in various particle sizes and can be tailored to meet specific application requirements. They can be used with different laser cladding techniques, such as powder-fed laser cladding or blown powder laser cladding, depending on the desired coating thickness and properties.

Overall, cobalt-based alloy powders for laser cladding provide enhanced surface properties and improved performa

Cobalt 12 Alloy Powder,Cobalt 21 Alloy Powder,Cobalt 6 Alloy Powder,Cobalt Laser Cladding Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com