Manual coding machine

The manual coder adopts hot printing tape instead of ink code, adopts a special movable word loading and unloading structure, and can code on any flexible packaging material. Code clear, easy to wipe off; clean, no pollution of ink, is an economic and sanitary printing. Working principle: Through the circuit board temperature control, the heating head is used to heat the copper head, and the head is pressed to print the toner on the ribbon onto the object to be printed.

The manual coder is a non-contact inkjet marking system controlled by a single chip microcomputer. It controls the internal gear pump or supplies the compressed gas from the outside of the machine to apply a certain pressure to the ink in the system, so that the ink is ejected through a tens of micrometer aperture nozzle. The crystal oscillation signal applied to the nozzle is used to split the continuous ink line to split into ink droplets with the same frequency, the same size, and a certain pitch. Then, the ink droplets are respectively charged when passing through the charging electrode, and the charged amount of the ink droplets is determined by the CPU. Control; After the detection electrode to detect the actual charge and phase of the ink drop is correct; Finally, the charged ink droplet deflection in the deflecting electrode to form the deflection field, ejected from the nozzle, respectively, hit the product surface in different locations, the formation of the required A variety of text, patterns and other logos. The ink droplets that have not been charged will enter the recovery tank and re-enter the ink circulation system inside the machine.

Principles and Features of Manual Coder Manual coder uses thermal printing tape instead of ink code, adopts a special type of movable word handling, and can code on any flexible packaging material. Code clear, easy to wipe off; clean, no pollution of ink, is an economic and sanitary printing. The coder is small, light and easy to operate.

Manual coder technical parameters:

Vertical round bottle automatic coding machine, using micro-processing loop control system, using touch man-machine interface;

Can paste 1-2 labels on round bottles 25-120mm in diameter;

Power: 220V, 50Hz, 0.4KW

Label specification: L(15~300)mm x H(15~130)mm

Product Specifications: Dia? 20~? 80; H (25 ~ 300) mm

Labeling speed: 0 to 75 sheets/minute (one label)

0 to 50 sheets/minute (two labels)

Dimensions: L1800mm, W1100mm, H1300mm

Can be equipped with accessories: Coder D-1

Classification of manual coders The main headband color coders, pneumatic coders, and ink coders are currently on the market. They all have their own differences! The ink wheel code printing times are more extensive, like the ones used by some small companies. The reason is simple and the price is the most affordable. His shortcomings are easy to wipe off, adhesion is not strong! The ribbon code. The price is more expensive than the ink wheel. Print looks better, and it is more difficult to wipe. It looks very Chu! If you have an oily food belt. The print effect will not be very good! Let's say sprayer. His performance may be the best machine for this example. His consumables are ink. It is not erased when printed. The effect is clear. However, the cost of machinery is high! The average small company can't use it.

Advantages and disadvantages of manual coders Advantages: Simple! After the power is turned on, it can be used after being warmed up; the consumables need to contain the ribbon write ink wheel, and the cost is low; the operation is simple; the floor space is small, and the small and medium enterprises generally use it.

Disadvantages: The date or batch number adhesion is normal; if wiped with alcohol, more than ten times may fade! Easy to appear hot, drop ink, food bags will not be clean; date trouble; limited print content, common text, numbers, print items are limited; paper, plastic bags, in particular, must be relatively flat to print; font is too small .