What are the reasons for the difficulty in starting a car?
Autumn is about to pass. Winter is coming. The weather is cold. People all know that they wear thick clothes to resist the cold. In the same way, cold weather is also a test for cars. I believe many car owners have encountered difficulties in ignition of cars in the cold winter, especially in the north. This situation is more common. Then, what causes the car to start? Difficult? 1. It may be that the battery is dead. In the cold winter, because the temperature is relatively low, the car's power consumption will be significantly higher than the power consumption of other seasons, and the battery plays an important role in the use of the vehicle. In addition, due to the influence of cold temperatures, the battery's capacity is reduced, resulting in deterioration of power storage capacity. Therefore, when using a car in winter, check the battery power. Remember to turn off the air-conditioning, headlights, and other electrical equipment after the flameout to prevent loss of electricity. If the car fails to ignite, avoid continuous ignition. It should be restarted after a few seconds to avoid damage to the car battery. 2, may be blocked oil flow. When the temperature in winter is low, the viscosity of the oil becomes large, resulting in a decrease in the fluidity of the engine oil, an increase in engine running resistance, and difficulty in starting. Therefore, it is necessary to use a suitable engine oil in winter. In order to avoid this happening, the owners should prepare for the oil replacement in advance. 3, the exhaust pipe may be frozen or valve carbon too much. The exhaust pipe freezes mainly because the water vapor generated by the combustion of the engine freezes at a certain part of the exhaust pipe, but it does not melt during driving. Over time, it may cause difficulty in starting. If this happens, as long as the car is running at high speed, the water in the exhaust pipe will be discharged. Excessive valve carbon deposition can block the throttle valve. It is recommended that the throttle valve be cleaned periodically to remove carbon deposits. In order to ensure the normal start of the car, the owners must develop good driving habits when using the car, and usually pay attention to the maintenance of the vehicle. Don't wait until something goes wrong before you think about what you didn't do. This will cause serious damage to the car and affect the life of the car. Mold processing refers to the processing of forming and billet making tools, in addition to shear molds and die-cutting molds.Mold Processing,Injection molds processing. Mold Processing,Injection Molds Processing,Plastic Mould Processing,Plastic Molds Processing Dongguan Anding Technology Manufacturing Co., Ltd , https://www.cn-moulds.com
